{"product_id":"kennametal-1793809-cutoff-insert-kc5025-carbide-4-mm","title":"Kennametal 1793809 Cutoff Insert KC5025 Carbide 4 Mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1793809 is a carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It carries the A2040R06CR03 designation within the Series A2 platform and is manufactured to grade KC5025 with a PVD-applied TiAlN coating. The insert delivers a 4.00 mm cutting width and a 4.66 mm cutting height, making it suited for moderate-depth cutoff work where edge wear resistance and dimensional consistency are critical. A clamp-style holding method secures the insert in the toolholder. The 6-degree right-hand lead angle and CR chipbreaker geometry promote controlled chip flow and reduce the risk of chip packing during deep parting cuts.\u003c\/p\u003e\u003cp\u003eThis insert is intended for production turning environments where carbide tooling is used on steel, cast iron, and similar workpiece materials falling within the C2 and C6 material grade range. Typical applications include OD grooving, parting to center, and face grooving on conventional or gang-tool lathe setups. The TiAlN coating extends tool life in dry or minimal-coolant cutting conditions. This insert is sold individually and must be ordered in multiples of 5 to meet minimum order requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eKC5025 carbide grade with PVD TiAlN coating for wear resistance in steel and cast iron\u003c\/li\u003e\n\u003cli\u003e4.00 mm cutting width with 0.0118 inch corner radius for consistent groove geometry\u003c\/li\u003e\n\u003cli\u003e6-degree right-hand lead angle with CR chipbreaker for controlled chip evacuation\u003c\/li\u003e\n\u003cli\u003eClamp-style insert holding method compatible with Series A2 toolholders\u003c\/li\u003e\n\u003cli\u003e2-degree relief angle reduces rubbing on groove walls during cutoff\u003c\/li\u003e\n\u003cli\u003eInsert seat size 4 for positive location and repeatable depth of cut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with Series A2 clamp-style cutoff and grooving toolholders accepting insert seat size 4 at a 4.00 mm cutting width.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutoff and grooving inserts are installed and replaced by machinists or CNC setup technicians. Ensure the machine spindle is fully stopped and the turret is in a safe index position before handling inserts. Inspect the insert pocket and clamp for burrs or debris before seating the new insert, as contamination can affect clamping force and insert orientation. Follow the toolholder manufacturer torque guidance for the clamping screw and verify insert seating visually before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Series\u003c\/strong\u003e: A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC5025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 4.00 mm (0.1575 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 4.66 mm (0.1835 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0118 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 6 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 2.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: CR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0051 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1793809\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51752758706482,"sku":"1793809","price":198.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e4f3fe1fb5f90d7eb506a0817b844cef.jpg?v=1788930136","url":"https:\/\/voomisupply.com\/products\/kennametal-1793809-cutoff-insert-kc5025-carbide-4-mm","provider":"Voomi Supply","version":"1.0","type":"link"}