{"product_id":"kennametal-1712554-threading-insert-iso-right-hand-kc5025","title":"Kennametal 1712554 Threading Insert Iso Right Hand KC5025","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1712554 is a solid carbide laydown threading insert designed for internal ISO thread cutting on CNC lathes and turning centers. It carries the KC5025 grade designation and features a PVD-applied TiAlN coating for wear resistance and thermal stability during threading operations. The right-hand configuration and CB chipbreaker geometry make it suited for consistent chip control on internal thread forms. The insert has a 3\/8 inch (9.53 mm) inscribed circle and a thickness of 0.1430 inches (3.44 mm), fitting standard LT16 style toolholders. This insert is installed and qualified by CNC machinists and turning specialists in precision machining environments.\u003c\/p\u003e\u003cp\u003eThe 1712554 is used in internal threading applications following the ISO thread standard with a 2.00 mm pitch. It is intended for use in production and job-shop environments where consistent thread quality and tool life are critical. The right-hand cutting geometry suits typical internal bore threading passes on compatible LT16NR toolholders. This insert is appropriate for ferrous and non-ferrous materials in residential and industrial component machining where tight thread tolerances are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with PVD TiAlN coating for extended wear resistance\u003c\/li\u003e\n\u003cli\u003eKC5025 grade optimized for threading stability and edge retention\u003c\/li\u003e\n\u003cli\u003eRight-hand internal ISO thread geometry with CB chipbreaker\u003c\/li\u003e\n\u003cli\u003e2.00 mm pitch for ISO standard internal thread forms\u003c\/li\u003e\n\u003cli\u003e3\/8 inch (9.53 mm) inscribed circle fits LT16 style toolholders\u003c\/li\u003e\n\u003cli\u003eHole diameter of 0.1551 inches (3.94 mm) for secure clamping in compatible holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit insert for LT16NR style internal threading toolholders accepting a 3\/8 inch inscribed circle laydown insert.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified CNC machinist or toolroom technician. Ensure the machine spindle is fully stopped and the toolholder is clear of the workpiece before indexing or replacing the insert. Use the correct torque wrench and clamping screw specified by the toolholder manufacturer to seat the insert properly. Verify thread pitch and hand orientation match the programmed threading cycle before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: 16NR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC5025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: 2.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: CB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (9.53 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.1430 inches (3.44 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1551 inches (3.94 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0088 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291804\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1712554\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51741211525426,"sku":"1712554","price":74.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/83b4f9568888e8d130c03de8d9b2bd05.jpg?v=1788830068","url":"https:\/\/voomisupply.com\/products\/kennametal-1712554-threading-insert-iso-right-hand-kc5025","provider":"Voomi Supply","version":"1.0","type":"link"}