{"product_id":"kennametal-1560803-turning-insert-dnms432-kc5410-carbide","title":"Kennametal 1560803 Turning Insert DNMS432 KC5410 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1560803 is a solid carbide turning insert conforming to ANSI insert code DNMS432 and ISO code DNMS150408. It carries the KC5410 grade designation and features a physical vapor deposition (PVD)-applied TiB2 coating engineered for high to moderate wear resistance when cutting aluminum and other non-ferrous metals. The insert has a 55-degree diamond (rhombic) shape with a neutral hand orientation, a 0.5 inch inscribed circle, a corner radius of 0.0313 inches (1\/32 inch), and an insert length of 15.50 mm (0.6102 inches). With four usable cutting edges and a honed cutting edge style, it is part of the KENLOC series and targets medium machining chip breaker conditions. Licensed machinists and CNC operators install this insert in production turning, facing, boring, back turning, and back boring operations.\u003c\/p\u003e\u003cp\u003eThis insert is suited for machining non-ferrous metals — aluminum alloys, copper, brass, and similar materials — in both light-production and medium-machining scenarios. The TiB2 PVD coating resists built-up edge on soft, gummy workpiece materials, which is a common challenge in aluminum turning. The KENLOC series design uses a clamp-and-pin holding method, which is typical in negative-rake insert toolholders. The insert carries both ANSI and ISO standards compliance, making it interchangeable across tooling systems that accept the DNMS432 form factor. Material grades C3 and C4 apply.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTiB2 PVD coating provides high wear resistance on aluminum and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003e55-degree diamond (D-shape) geometry with negative rake angle of 20 degrees\u003c\/li\u003e\n\u003cli\u003eFour cutting edges for extended tooling life per insert\u003c\/li\u003e\n\u003cli\u003e0.0313 inch (1\/32 inch) corner radius for medium-finish operations\u003c\/li\u003e\n\u003cli\u003eCompatible with clamp-and-pin KENLOC toolholders using negative side clearance\u003c\/li\u003e\n\u003cli\u003eMulti-use application: turning, facing, boring, back turning, and back boring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in KENLOC-series toolholders accepting DNMS432 (ISO DNMS150408) negative-rake inserts with a clamp-and-pin holding method. Suitable for operations conforming to ANSI and ISO DNMS insert standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Before replacing inserts, power down the machine and follow lockout\/tagout procedures per applicable shop safety standards. Seat the insert fully against the toolholder pocket and torque the clamping screw according to the toolholder manufacturer specifications. Inspect the pocket for chips or debris before seating a new insert to avoid seating errors that can cause premature edge failure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: DNMS432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: DNMS150408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC5410\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiB2 (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: D - Diamond (Rhombic) 55 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 15.50 mm (1.2208 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0313 inches (1\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2031 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 1.25 mm (0.0492 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 20 degrees (Negative)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: Common \/ Medium Machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C3, C4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KENLOC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.022 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1560803\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728127459634,"sku":"1560803","price":263.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e81cfd937d1697750d3a2bd97acbd895.jpg?v=1788688441","url":"https:\/\/voomisupply.com\/products\/kennametal-1560803-turning-insert-dnms432-kc5410-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}