{"product_id":"kennametal-1505111-replaceable-tip-drill-17-46-17-96mm-weldon","title":"Kennametal 1505111 Replaceable-tip Drill 17.46-17.96mm Weldon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1505111 is a replaceable-tip drill body designed for precision hole-making in metalworking and machining applications. It accepts KSEM0688 series inserts at insert seat size 1, allowing the cutting tip to be swapped without replacing the entire tool body. The drill covers a diameter range of 17.46 to 17.96 mm (0.6874 to 0.7071 inches) with a maximum drill depth of 54 mm (2.13 inches), rated at a 3xD depth-to-diameter ratio. Through-coolant capability is standard, delivered via 1\/8-27 NPT coolant ports at both the shank end and body side, supporting higher feed rates and improved chip evacuation in production environments. Machinists, tool-room technicians, and CNC operators install this body into standard machine spindles.\u003c\/p\u003e\n\u003cp\u003eThis drill body is suited for use in CNC machining centers, turning centers with live tooling, and conventional drilling machines where a Weldon Flat shank interface is available. The 19.05 mm Weldon Flat shank provides positive rotational drive and resist pullout under interrupted cuts or high feed conditions. Typical applications include drilling through or blind holes in steel, cast iron, aluminum, and similar workpiece materials in job-shop and production-floor environments where index-able tip tooling reduces per-hole tooling cost and setup time.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaceable KSEM0688 insert tip eliminates the need to replace the full drill body on tip wear\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design with 1\/8-27 NPT ports at shank end and body side for active chip flushing and heat control\u003c\/li\u003e\n  \u003cli\u003e3xD depth-to-diameter ratio supports drilling depths up to 54 mm in a single pass\u003c\/li\u003e\n  \u003cli\u003eWeldon Flat shank (19.05 mm diameter) provides secure, anti-pullout drive in standard Weldon-style holders\u003c\/li\u003e\n  \u003cli\u003eInsert seat size 1 for compatibility within the KSEM modular drill system\u003c\/li\u003e\n  \u003cli\u003eOverall length of 146.05 mm (5.75 inches) with a flute length of 75.18 mm (2.96 inches) for balanced reach and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with KSEM0688 series replaceable drill inserts, insert seat size 1, within the KENNAMETAL KSEM modular drill system. Requires a machine tool spindle or toolholder accepting a 19.05 mm Weldon Flat shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by qualified machinists or toolroom personnel with the machine spindle fully stopped and the machine control locked out per applicable shop safety procedures. Secure the Weldon Flat shank in a properly sized Weldon-style holder and verify set-screw torque per the toolholder manufacturer specification before running. Confirm coolant port connections are clear and coolant pressure is appropriate for the machine before initiating a cut. Inspect the insert seat for debris or damage each time a KSEM0688 tip is indexed or replaced.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 17.46 mm (0.6874 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 17.96 mm (0.7071 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 54 mm (2.13 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 146.05 mm (5.75 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 75.18 mm (2.96 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 19.05 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: KSEM0688\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KSEM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Hole Thread Type\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Side Coolant Hole Thread Size\u003c\/strong\u003e: 1\/8-27 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank End Coolant Hole Thread Size\u003c\/strong\u003e: 1\/8-27 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.926 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1505111\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51749742608690,"sku":"1505111","price":569.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2afb4a7d2a897363092047fc9a467f77.jpg?v=1788909821","url":"https:\/\/voomisupply.com\/products\/kennametal-1505111-replaceable-tip-drill-17-46-17-96mm-weldon","provider":"Voomi Supply","version":"1.0","type":"link"}