{"product_id":"kennametal-1281802-threading-toolholder-external-right-hand","title":"Kennametal 1281802 Threading Toolholder External Right Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1281802 is an indexable threading toolholder designed for external thread-cutting operations on CNC lathes and manual turning centers. Built in the LSAS toolholder style, it accepts LT 16ER series inserts and uses a clamp-style insert holding method for secure, repeatable positioning. The shank measures 0.75 x 0.75 inches (19.05 x 19.05 mm) with an overall length of 5 inches, making it a compact, right-hand configuration suited for standard external threading applications. Machinists and toolroom professionals install this holder in production and job-shop environments where consistent thread geometry and quick insert indexing are required.\u003c\/p\u003e\u003cp\u003eThis toolholder is intended for external threading on ferrous and non-ferrous workpieces in turning applications. Its right-hand orientation suits the most common lathe setups. The LT 16ER insert compatibility covers a range of thread profiles, and the clamp holding method keeps inserts firmly seated during interrupted or continuous threading cuts. The 3\/8-inch insert inscribed circle size matches standard LT series threading inserts. This holder does not include coolant-through capability, making it straightforward to set up on standard coolant-off or flood-coolant machines.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLSAS toolholder style with right-hand cutting orientation\u003c\/li\u003e\n\u003cli\u003eAccepts LT 16ER series threading inserts via clamp holding method\u003c\/li\u003e\n\u003cli\u003eSquare shank: 0.75 x 0.75 inches (19.05 x 19.05 mm) for rigid machine tool interface\u003c\/li\u003e\n\u003cli\u003eOverall length of 5 inches suits standard turning center toolposts and turrets\u003c\/li\u003e\n\u003cli\u003eInsert inscribed circle of 3\/8 inch for compatibility with LT 16ER geometry inserts\u003c\/li\u003e\n\u003cli\u003eNo coolant-through channel — simplified setup on standard turning equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with LT 16ER series indexable threading inserts. This toolholder is part of the KENNAMETAL LT Threading series (series reference LSASR\/L123). Specific machine compatibility depends on toolpost or turret bore size; confirm 0.75 x 0.75 inch shank clearance before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or toolroom technician. Power down and lock out the machine before mounting or removing the toolholder from the turret or toolpost. Ensure the shank seating surfaces are clean and free of chips before clamping. Follow the machine tool manufacturer's recommended torque specifications for toolholder clamping hardware.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: LSAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: External\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: LT 16ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\/Diameter\u003c\/strong\u003e: 0.75 inches (19.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.75 inches (19.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches (127 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.2 inches (30.48 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.75 inches (19.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: LT Threading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.79 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1281802\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51734637609266,"sku":"1281802","price":212.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e1774d4ffee4ab45e511f6fc7c28ebd9.jpg?v=1788764210","url":"https:\/\/voomisupply.com\/products\/kennametal-1281802-threading-toolholder-external-right-hand","provider":"Voomi Supply","version":"1.0","type":"link"}