{"product_id":"kennametal-1181987-ceramic-turning-insert-wnga433t0820","title":"Kennametal 1181987 Ceramic Turning Insert WNGA433T0820","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1181987 is a WNGA433T0820 ceramic turning insert in the KY3500 grade, designed for high-speed machining of cast iron workpieces. Made from silicon nitride ceramic in an uncoated, bright finish, this insert delivers high wear resistance with moderate toughness across a hardness range suited to gray and ductile cast iron. The trigon (W) shape provides an 80-degree included angle and a flat-top chip breaker geometry with a T-Land cutting edge style. With six usable cutting edges and a negative rake angle, this insert maximizes tool life per insert and reduces cost per edge in production turning operations. It is installed and managed by CNC machinists and toolroom technicians.\u003c\/p\u003e\u003cp\u003eThis insert is suited for turning, facing, and boring applications on cast iron components in both production and job-shop environments. The KENLOC series mount accepts clamp and pin holding methods, and the insert seats in compatible WNGA-style toolholders. The flat-top geometry with negative rake is particularly effective in interrupted or continuous cuts on cast iron where abrasive wear is the primary failure mode. Maximum depth of cut is 0.0492 inches (1.25 mm), making this insert appropriate for finishing and light semi-finishing passes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSilicon nitride ceramic substrate provides high wear resistance for cast iron machining\u003c\/li\u003e\n\u003cli\u003eKY3500 grade balances wear resistance with moderate toughness for consistent tool life\u003c\/li\u003e\n\u003cli\u003eSix cutting edges per insert for low cost-per-edge in high-volume operations\u003c\/li\u003e\n\u003cli\u003eFlat-top chip breaker with T-Land edge prep reduces chipping on abrasive cast iron\u003c\/li\u003e\n\u003cli\u003eNegative rake, negative side clearance geometry for secure seating under cutting loads\u003c\/li\u003e\n\u003cli\u003eCompatible with clamp and pin holding methods in KENLOC-series toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in WNGA-style toolholders using clamp and pin retention, conforming to ANSI insert code WNGA433 and ISO insert code WNGA080412. Suitable for turning, facing, and boring operations on cast iron workpieces.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis insert is installed by qualified CNC machinists or toolroom technicians. Power down and lock out the machine spindle before indexing or replacing inserts. Inspect the toolholder pocket and seating surfaces for debris or damage before seating a new edge. Follow the toolholder manufacturer's clamping torque specifications and verify insert seating before resuming cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: WNGA433\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: WNGA080412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: WNGA433T0820\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KY3500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Silicon Nitride\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated (Bright)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: W - Trigon 80-Degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.6840 inches (8.69 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 3\/64 inch (0.0469 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2031 inches (5.16 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.0492 inches (1.25 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: Flat Top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: T-Land\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 0 degrees (Negative Rake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron (K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Use Application\u003c\/strong\u003e: Turning, Facing, Boring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: KENLOC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0077 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1181987\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728110190898,"sku":"1181987","price":249.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a30faa209e4f30d2a09df0ba825a3bb2.jpg?v=1788688151","url":"https:\/\/voomisupply.com\/products\/kennametal-1181987-ceramic-turning-insert-wnga433t0820","provider":"Voomi Supply","version":"1.0","type":"link"}