{"product_id":"kennametal-1161923-turning-insert-dcgt32-51hp-kc730","title":"Kennametal 1161923 Turning Insert DCGT32.51HP KC730","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1161923 is a solid carbide turning insert with a PVD-applied TiN coating, designed for high-precision finishing operations on steel, stainless steel, and superalloys. It carries the DCGT32.51HP ANSI designation and conforms to ISO code DCGT11T304. The 55-degree diamond (rhombic) shape provides a positive rake angle of 15 degrees and a 7-degree relief angle, promoting clean chip formation and low cutting forces. With a 1\/64-inch corner radius and honed cutting edge, this insert is built for fine finishing passes where surface finish and dimensional accuracy are priorities. The KC730 grade delivers high wear resistance with moderate toughness across a range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for finishing applications in CNC turning centers and manual lathes handling steel (P), stainless steel (M), and cast iron (K) workpieces, with secondary suitability for superalloys and titanium (S). Typical operations include turning, facing, boring, back turning, and back boring. The screw-on holding method suits toolholders designed for DCGT-style inserts with a 0.1732-inch hole diameter. It is a multi-use insert appropriate for both production and job-shop environments where consistent surface quality is required across moderate to high cutting speeds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePVD TiN coating on solid carbide substrate for high wear resistance in steel and stainless steel applications\u003c\/li\u003e\n  \u003cli\u003e55-degree diamond insert shape with positive rake for reduced cutting forces during finishing passes\u003c\/li\u003e\n  \u003cli\u003eHP chip breaker geometry optimized for finishing operations with maximum depth of cut of 0.0492 inches (1.25 mm)\u003c\/li\u003e\n  \u003cli\u003eHoned cutting edge style for consistent surface finish and edge integrity\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation with 7-degree relief angle and positive side clearance\u003c\/li\u003e\n  \u003cli\u003eCompatible with ANSI and ISO standard toolholding systems via screw-on mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in screw-on DCGT-style toolholders conforming to ANSI and ISO standards. Suitable for primary workpiece materials steel (P), stainless steel (M), and cast iron (K), with secondary ratings for superalloys and titanium (S). Material grades C2, C3, and C4 apply.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machining professionals or toolroom technicians using appropriate DCGT screw-on toolholders. Ensure the machine spindle is fully stopped and the toolholder is clean and free of debris before seating the insert. Secure the insert with the correct torque wrench per the toolholder manufacturer specifications to avoid insert movement or chipping. Inspect the cutting edge and chip breaker condition before each use and replace the insert when wear exceeds acceptable limits for the application.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: DCGT3251\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: DCGT11T304\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: KC730\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: D - Diamond (Rhombic) 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: HP (Finishing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.9130 inches (11.63 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 5\/32 inch (0.1563 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/64 inch (0.0156 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches (4.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.0492 inches (1.25 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw-On\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Superalloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C3, C4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Applications\u003c\/strong\u003e: Turning, Facing, Boring, Back Turning, Back Boring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0086 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1161923\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51731841188146,"sku":"1161923","price":228.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/55210b7b83d375fa697247eede73a1e5.jpg?v=1788735488","url":"https:\/\/voomisupply.com\/products\/kennametal-1161923-turning-insert-dcgt32-51hp-kc730","provider":"Voomi Supply","version":"1.0","type":"link"}