{"product_id":"kennametal-1152588-e-ctfp-indexable-boring-bar-6-in-rh","title":"Kennametal 1152588 E-ctfp Indexable Boring Bar 6 in Rh","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1152588 is a right-hand E-CTFP indexable boring bar engineered for internal turning and bore finishing operations on machining centers and CNC lathes. Built from solid carbide, it delivers the rigidity and vibration resistance needed for tight-tolerance bores. The bar has a 6-inch overall length, a 5\/8-inch shank diameter, and a minimum bore diameter of 0.770 inches (19.56 mm). Through-coolant capability directs fluid directly to the cutting zone, extending insert life and improving chip evacuation in deep-bore applications. It accepts TP-series inserts held by a clamp-style mechanism and features a positive 5-degree rake angle for efficient cutting action. This bar is installed by machinists and toolroom technicians working in precision boring applications.\u003c\/p\u003e\n\u003cp\u003eThe 1152588 is suited for both production and job-shop environments where consistent bore quality is required. Its E-CTFP toolholder style and Kendex series designation make it a direct fit for shops already standardized on KENNAMETAL Kendex tooling. The 0.406-inch center-to-cutting-edge dimension supports accurate setup and offset calculations. Typical applications include finish boring of steel, cast iron, and similar ferrous materials in medium to light cutting conditions. The 1\/4-inch insert inscribed circle and 1\/8-inch insert thickness are standard Kendex parameters that simplify insert procurement and changeover.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and minimal deflection in tight-bore applications\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design with 0.220-inch coolant hole diameter for direct chip and heat management\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut orientation with positive 5-degree rake angle for reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding compatible with TP-series inserts (1\/4-inch IC, 1\/8-inch thickness)\u003c\/li\u003e\n  \u003cli\u003eMinimum bore diameter of 0.770 inches (19.56 mm) suitable for small-diameter internal turning\u003c\/li\u003e\n  \u003cli\u003e6-inch overall length with 5\/8-inch shank for standard boring head and turret mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with TP-series E-CTFP inserts in the KENNAMETAL Kendex tooling system. Accepts inserts with a 1\/4-inch inscribed circle and 1\/8-inch thickness. Compatible with machine tool setups that accept a 5\/8-inch round shank boring bar.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or toolroom technician. Secure the shank fully within the boring head or turret block to the specified clamp engagement depth before engaging the spindle. Ensure the machine spindle is fully stopped and the CNC control is in a safe state before changing inserts or adjusting the bar. Verify coolant line connections are clear and pressurized before running through-coolant passes to prevent insert damage from interrupted fluid flow.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 0.770 inches (19.56 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (15.88 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: E-CTFP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: TP-series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.406 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Hole Diameter\u003c\/strong\u003e: 0.220 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kendex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.804 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241601\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1152588\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51755654283570,"sku":"1152588","price":937.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c61ce77e8093e5160c1cc2e03597423.jpg?v=1788957649","url":"https:\/\/voomisupply.com\/products\/kennametal-1152588-e-ctfp-indexable-boring-bar-6-in-rh","provider":"Voomi Supply","version":"1.0","type":"link"}