{"product_id":"kennametal-1096316-indexable-turning-toolholder-mrgnl206d","title":"Kennametal 1096316 Indexable Turning Toolholder MRGNL206D","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1096316 is a left-hand indexable turning toolholder in the Kenloc series, designed for use with RN-style negative-rake inserts on CNC and manual lathes. It uses a clamp screw insert holding method and features a 1.25 x 1.25 inch square steel shank with an overall length of 6 inches. The toolholder is engineered for a negative rake angle of -5 degrees, making it well-suited for interrupted cuts and hard-turning applications where insert stability is critical. Licensed machinists and CNC turning specialists are the primary installers of this toolholder.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is appropriate for external turning operations in production and job-shop environments, both at the manual lathe and CNC turning center level. It is configured for left-hand cutting direction, which determines proper orientation on the machine turret or tool post. The MRGNL206D style designation identifies the toolholder geometry, and the RN insert compatibility supports a 3\/4-inch inscribed circle insert, providing a robust cutting edge for medium to heavy material removal rates. No coolant-through capability is present on this toolholder.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft-hand cutting orientation for proper turret or tool post positioning\u003c\/li\u003e\n  \u003cli\u003eClamp screw insert retention for secure, repeatable insert seating\u003c\/li\u003e\n  \u003cli\u003eCompatible with RN.. 64.. series inserts with a 3\/4-inch inscribed circle\u003c\/li\u003e\n  \u003cli\u003eNegative rake geometry at -5 degrees for stable cutting under high loads\u003c\/li\u003e\n  \u003cli\u003e1.25 x 1.25 inch square steel shank with 6-inch overall length\u003c\/li\u003e\n  \u003cli\u003eKenloc series toolholder — part of Kennametal standard catalog lineup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with RN.. 64.. series negative-rake inserts featuring a 3\/4-inch inscribed circle. Insert style and geometry must match the MRGN toolholder designation. No additional compatible model or machine data was provided in the product source.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. The machine spindle must be fully stopped and the turret locked out before mounting or removing any toolholder. Verify shank fit and turret pocket tolerances before tightening fasteners. Follow the machine tool manufacturer guidelines and applicable shop safety procedures when setting tool offsets and insert torque.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MRGN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: RN.. 64..\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.31 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.50 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.73 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096316\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51737591447858,"sku":"1096316","price":200.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/43878f67dc36ce045aed185dda817908.jpg?v=1788791009","url":"https:\/\/voomisupply.com\/products\/kennametal-1096316-indexable-turning-toolholder-mrgnl206d","provider":"Voomi Supply","version":"1.0","type":"link"}