{"product_id":"kennametal-1096307-mrgn-indexable-turning-toolholder","title":"Kennametal 1096307 Mrgn Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1096307 is a right-hand MRGN-style indexable turning toolholder from the Kenloc series, designed for external turning operations on CNC lathes and manual turning centers. It features a negative 5-degree rake angle and a 15-degree lead angle, which promotes stable cutting and helps direct cutting forces into the workpiece. The toolholder accepts RN..43 series inserts secured by a clamp and screw holding method, providing repeatable insert location and rigid clamping. The steel construction and Kenloc design make it a reliable choice for production turning environments where consistent performance under interrupted or continuous cuts is required.\u003c\/p\u003e\u003cp\u003eThis toolholder suits general-purpose external turning applications in both job-shop and production settings. The 1-inch by 1-inch square shank fits standard OD turning blocks and quick-change tool posts commonly found on mid-size lathes. It is appropriate for turning ferrous and non-ferrous materials where a negative-rake insert geometry is preferred for its strength and edge durability. Licensed machinists and CNC operators typically select this holder for roughing and semi-finishing passes on steel, cast iron, and similar materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRight-hand MRGN toolholder style with negative 5-degree rake angle for strong insert support\u003c\/li\u003e\n\u003cli\u003e15-degree lead angle promotes smooth chip flow and reduces radial cutting forces\u003c\/li\u003e\n\u003cli\u003eClamp and screw insert holding method provides rigid, repeatable insert seating\u003c\/li\u003e\n\u003cli\u003eCompatible with RN..43 series round inserts with a 0.5-inch inscribed circle\u003c\/li\u003e\n\u003cli\u003e1-inch by 1-inch square shank fits standard turning tool blocks and quick-change posts\u003c\/li\u003e\n\u003cli\u003ePart of the Kenloc series; no coolant-through feature on this model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to accept RN..43 series round indexable inserts with a 0.5-inch (1\/2-inch) inscribed circle. Insert holding is via clamp and screw. Verify insert designation and corner radius against the Kenloc series insert catalog before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC operators. Secure the shank firmly in the toolholder block or quick-change post to the machine manufacturer's recommended clamping torque before cutting. Ensure the machine spindle is fully stopped and the lathe is in an e-stop or locked-out state before changing inserts or adjusting the toolholder. Confirm insert seating and clamp screw engagement before initiating any cutting pass.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MRGN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: RN..43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.74 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096307\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51732885209394,"sku":"1096307","price":175.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3e029893f6201735a01669a602cba84a.jpg?v=1788748056","url":"https:\/\/voomisupply.com\/products\/kennametal-1096307-mrgn-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}