{"product_id":"kennametal-1096299-mvjn-turning-toolholder-lh-negative-rake","title":"Kennametal 1096299 Mvjn Turning Toolholder Lh Negative Rake","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1096299 is a left-hand MVJN-style indexable turning toolholder designed for external turning operations on CNC and manual lathes. It features a negative rake geometry and accepts VN..43. series inserts secured by a clamp and screw holding method. The shank measures 1 inch x 1 inch with an overall length of 5 inches, making it a standard fit for most tool post and turret setups. The Kenloc series design provides rigid insert clamping for stable cuts in steel, cast iron, and similar materials. Licensed machinists and CNC turning technicians are the primary installers of this toolholder.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is suited for production and job-shop turning environments where left-hand tool orientation is required. The 3-degree lead angle and negative rake configuration support interrupted cuts and heavy-stock removal passes. The back-of-bar to cutting edge dimension is 1.25 inches, and the insert inscribed circle is 0.5 inches, both relevant when setting up tool offsets and planning depth-of-cut. It is a single-application tool with no coolant-through capability, intended for use in dry or externally flooded coolant setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft-hand MVJN toolholder style for right-to-left turning operations\u003c\/li\u003e\n  \u003cli\u003eNegative rake geometry for heavy-duty and interrupted cutting applications\u003c\/li\u003e\n  \u003cli\u003eAccepts VN..43. inserts (complete compatibility: VN.. 432) held by clamp and screw\u003c\/li\u003e\n  \u003cli\u003e1 inch x 1 inch steel shank with 5 inch overall length for standard turret and tool post mounting\u003c\/li\u003e\n  \u003cli\u003eKenloc series clamping system for rigid, repeatable insert indexing\u003c\/li\u003e\n  \u003cli\u003eHead length of 2 inches with 1.25 inch back-of-bar to cutting edge dimension for precise tool offset setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to accept VN..43. series indexable inserts with a 0.5 inch inscribed circle. Complete insert compatibility is listed as VN.. 432. Confirm insert grade and geometry selection with the applicable Kennametal catalog for your workpiece material and cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or turning technicians. Power down and lock out the lathe spindle before seating or indexing inserts and before mounting the toolholder in the turret or tool post. Ensure the shank bore or tool post pocket is clean and free of chips before clamping to maintain accurate centerline height. Torque insert clamping screws to the toolholder manufacturer specification found in the Kennametal tooling documentation for this series.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MVJN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: VN..43.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.39 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096299\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728576872754,"sku":"1096299","price":247.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0ad877fbf14a23cd8caa7de9137dd5ce.jpg?v=1788693546","url":"https:\/\/voomisupply.com\/products\/kennametal-1096299-mvjn-turning-toolholder-lh-negative-rake","provider":"Voomi Supply","version":"1.0","type":"link"}