{"product_id":"kennametal-1096267-indexable-turning-toolholder","title":"Kennametal 1096267 Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1096267 is a right-hand MDQN-style indexable turning toolholder designed for negative-rake metal cutting operations on the lathe. Built on the Kenloc clamping system, it uses a clamp-and-screw insert holding method to secure DN..43. series inserts with a 0.5-inch inscribed circle. The steel shank measures 1 inch wide by 1 inch tall with an overall length of 6 inches, giving the holder a rigid, low-deflection profile suited to interrupted cuts and heavier material removal passes. Licensed machinists and CNC lathe operators use this holder in turning centers and engine lathes where consistent insert seating and repeatability are required.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is intended for external turning applications in both production and job-shop environments. The 27.5-degree lead angle promotes chip flow and reduces radial cutting forces, making it practical for shoulder turning and general OD work on ferrous and non-ferrous materials. The right-hand orientation positions the cutting edge for standard left-to-right feed direction on a conventional lathe setup. No coolant-through feature is present, so external flood or mist coolant delivery should be used when thermal management is needed.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMDQN toolholder style with clamp-and-screw insert retention for secure seating under heavy cuts\u003c\/li\u003e\n  \u003cli\u003eNegative rake angle of -7 degrees for increased edge strength on harder and interrupted workpieces\u003c\/li\u003e\n  \u003cli\u003e27.5-degree lead angle reduces radial force and promotes favorable chip direction\u003c\/li\u003e\n  \u003cli\u003e1 x 1 inch steel shank provides rigid support in standard square-shank tool blocks and turrets\u003c\/li\u003e\n  \u003cli\u003e6-inch overall length with 1.25-inch back-of-bar to cutting edge clearance\u003c\/li\u003e\n  \u003cli\u003ePart of the Kennametal Kenloc series for consistent insert indexing and repeatability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to accept DN..43. series indexable inserts with a 0.5-inch (1\/2 inch) inscribed circle, as indicated by the complete insert compatibility designation DN.. 432. Verify insert geometry and chipbreaker selection against workpiece material and cutting parameters before ordering inserts.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Secure the toolholder firmly in the turret or tool block so the shank is fully engaged and clamping surfaces are clean and free of chips. Power down and lock out the lathe spindle before changing inserts or repositioning the holder. Do not exceed the insert manufacturer's recommended cutting data for feed, speed, and depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MDQN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 27.5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.37 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: DN..43.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.64 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096267\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51739055489330,"sku":"1096267","price":248.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e50413e09fed898778d359c1cc04aba1.jpg?v=1788808585","url":"https:\/\/voomisupply.com\/products\/kennametal-1096267-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}