{"product_id":"kennametal-1096164-indexable-turning-toolholder-msrnl246d","title":"Kennametal 1096164 Indexable Turning Toolholder MSRNL246D","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1096164 is a left-hand indexable turning toolholder in the MSRN style, engineered for negative-rake insert clamping using the Clamp Screw holding method. Part of the Kennametal Kenloc series, it features a square 1.5 x 1.5 inch steel shank and an overall length of 6 inches. It accepts SN-style inserts with a 3\/4 inch inscribed circle, making it suited for medium to heavy turning operations where rigid, secure insert retention is required. Licensed CNC lathe operators and toolroom machinists are the primary installers of this toolholder in production and job-shop turning environments.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is designed for use on CNC lathes and manual turning centers where a left-hand cutting orientation is required. Its negative rake geometry and Clamp Screw clamping method provide stability during interrupted cuts and heavier depths of cut. The 1.5 x 1.5 inch shank fits standard tool block and turret positions sized for that cross-section. The back-of-bar to cutting edge dimension of 1.821 inches and head length of 1.5 inches allow predictable tool offset setup in both manual and CNC programming environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMSRN-style left-hand toolholder for negative-rake turning inserts\u003c\/li\u003e\n  \u003cli\u003eClamp Screw insert holding method for secure, repeatable insert retention\u003c\/li\u003e\n  \u003cli\u003eAccepts SN-style inserts with 3\/4 inch (0.750 inch) inscribed circle\u003c\/li\u003e\n  \u003cli\u003eSquare 1.5 x 1.5 inch steel shank fits standard turret and tool block positions\u003c\/li\u003e\n  \u003cli\u003e6 inch overall length with 1.821 inch back-of-bar to cutting edge measurement\u003c\/li\u003e\n  \u003cli\u003ePart of the Kennametal Kenloc series for consistent toolholder system compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SN-style (SN.. 643) negative-rake turning inserts with a 3\/4 inch inscribed circle. Fits tool blocks and turrets with a 1.5 x 1.5 inch square shank bore. Coolant-through is not supported on this toolholder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified CNC machinist or toolroom technician. Power down and lock out the turning center before changing or seating the toolholder in the turret or tool block. Use the correct insert screw torque specified in the Kennametal toolholder documentation supplied with the product — do not estimate torque values. Verify tool offset and cutting edge height to centerline before resuming operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MSRN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: SN.. 643\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.750 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.821 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.82 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096164\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51750789611826,"sku":"1096164","price":243.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c89abfa9bdc617a151b5ebd327953ea4.jpg?v=1788919727","url":"https:\/\/voomisupply.com\/products\/kennametal-1096164-indexable-turning-toolholder-msrnl246d","provider":"Voomi Supply","version":"1.0","type":"link"}