{"product_id":"kennametal-1096072-mcln-indexable-turning-toolholder","title":"Kennametal 1096072 Mcln Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1096072 is a right-hand MCLN-style indexable turning toolholder from the Kenloc series, designed for external turning operations on CNC lathes and manual turning centers. It accepts CN..54. series inserts secured by a combination clamp and screw holding method, providing rigid, repeatable insert positioning under negative rake cutting conditions. The shank measures 1 inch wide by 1 inch tall with an overall length of 6 inches, making it a standard square-shank holder suitable for a wide range of tool post and turret configurations. Licensed machinists and CNC operators install this holder in production and job-shop environments where consistent insert indexing and tool life are priorities.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is suited for general-purpose external turning in both roughing and finishing passes where negative rake geometry is preferred for harder workpiece materials or interrupted cuts. The 5-degree lead angle and 1.37-inch head length position the cutting edge to promote chip flow away from the finished surface. The Kenloc clamping system is a well-established platform used across a broad range of KENNAMETAL indexable tooling programs, supporting fast insert changes during production runs. No coolant-through capability is present on this holder, so external coolant delivery must be used when flood or mist cooling is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRight-hand MCLN toolholder style with 5-degree lead angle for controlled chip direction\u003c\/li\u003e\n  \u003cli\u003eAccepts CN..54. inserts, including DN.. 543 compatible inserts, with clamp and screw holding method\u003c\/li\u003e\n  \u003cli\u003eNegative rake geometry suited for interrupted cuts and harder workpiece materials\u003c\/li\u003e\n  \u003cli\u003e1 inch x 1 inch square shank with 6-inch overall length fits standard lathe tool posts and turrets\u003c\/li\u003e\n  \u003cli\u003eKenloc series clamping platform supports fast, repeatable insert indexing\u003c\/li\u003e\n  \u003cli\u003eSteel toolholder body for rigidity and long service life in production environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CN..54. series indexable inserts, with complete compatibility confirmed for DN.. 543 inserts. Fits standard square-shank tool posts and turret pockets accepting a 1 inch x 1 inch shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Before mounting or changing inserts, the machine spindle must be stopped and all motion axes must be locked out following the machine builder lockout-tagout procedure. Torque the clamp screw to the insert manufacturer specification using the appropriate Torx or hex key supplied with the Kenloc tooling system. Verify tool centerline height and lead angle orientation against the setup sheet before resuming cutting operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MCLN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.37 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: CN..54. \/ DN.. 543\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.79 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096072\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51738278986034,"sku":"1096072","price":175.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/05a891a111f75d038415166681334377.jpg?v=1788797582","url":"https:\/\/voomisupply.com\/products\/kennametal-1096072-mcln-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}