{"product_id":"kennametal-1096023-mtjn-turning-toolholder-1x1-shank","title":"Kennametal 1096023 Mtjn Turning Toolholder 1x1 Shank","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1096023 is a left-hand MTJN-style indexable turning toolholder designed for negative rake cutting operations on CNC lathes and manual turning centers. Built on the Kenloc clamping platform, it uses a clamp and screw holding method to secure TN..43. series inserts with a 1\/2-inch inscribed circle. The steel shank measures 1 inch wide by 1 inch tall with an overall length of 6 inches. This toolholder is intended for machinists and toolroom professionals who require a rigid, repeatable setup for external turning, facing, and chamfering operations.\u003c\/p\u003e\u003cp\u003eThe 1096023 is suited for external turning applications in both production and job-shop environments. Its left-hand orientation makes it the correct choice for specific tool post positions and gang-tool setups where a right-hand holder would create interference. The negative rake geometry is well matched to harder work materials and interrupted cuts where insert edge strength is a priority. The Kenloc series is a standard platform within KENNAMETAL tooling systems, making insert changeover straightforward during a running job.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand MTJN toolholder style with negative rake geometry\u003c\/li\u003e\n\u003cli\u003eKenloc clamp and screw insert holding method for rigid, repeatable seating\u003c\/li\u003e\n\u003cli\u003eAccepts TN..43. series inserts with 0.5-inch inscribed circle\u003c\/li\u003e\n\u003cli\u003e1 x 1 inch steel shank for compatibility with standard tool posts and turrets\u003c\/li\u003e\n\u003cli\u003e6-inch overall length with a 1.12-inch head length\u003c\/li\u003e\n\u003cli\u003eBack of bar to cutting edge measures 1.25 inches for accurate centerline setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to accept TN..43. series inserts, specifically the TN.. 432 complete insert compatibility designation. Verify insert geometry and nose radius match the intended application before ordering inserts separately.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tool post torque and clamping procedures. Power down and lock out the machine spindle before changing or indexing inserts. Use the appropriate Kenloc torque wrench or hex key as specified by KENNAMETAL insert clamping guidelines to avoid over-torquing the clamp screw. Confirm tool centerline height during setup to maintain the negative rake geometry at the cutting edge.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MTJN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: TN..43.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.79 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1096023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51749047271730,"sku":"1096023","price":183.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1e46664a884faae9d3fdc6eef1dfe2df.jpg?v=1788901391","url":"https:\/\/voomisupply.com\/products\/kennametal-1096023-mtjn-turning-toolholder-1x1-shank","provider":"Voomi Supply","version":"1.0","type":"link"}