{"product_id":"kennametal-1094484-turning-toolholder-left-hand-sclc","title":"Kennametal 1094484 Turning Toolholder Left Hand Sclc","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1094484 is a left-hand SCLC-style indexable turning toolholder designed for precision external turning operations on CNC and manual lathes. It features a neutral rake geometry with a 0-degree rake angle and a 5-degree lead angle, making it well suited for general-purpose turning where consistent chip control and insert seating are critical. The screw-on insert holding method locks the insert securely during heavy interrupted or continuous cuts. The shank measures 0.625 inches wide by 0.630 inches tall with an overall length of 4 inches. This toolholder is installed by machinists and CNC operators in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis toolholder is used in external turning applications on standard square-shank toolpost setups found on CNC turning centers and engine lathes in both production and maintenance machining environments. The left-hand orientation positions the cutting edge for right-to-left feed direction cuts. It accepts CC..32.5. series inserts with a 3\/8-inch inscribed circle, which are common in general turning of steel, cast iron, and similar materials. The screw-on clamping method provides positive insert location without an overhead clamp obstructing chip flow.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSCLC toolholder style with left-hand orientation for right-to-left feed direction turning\u003c\/li\u003e\n\u003cli\u003eNeutral rake, 0-degree rake angle and 5-degree lead angle for versatile general-purpose cutting\u003c\/li\u003e\n\u003cli\u003eScrew-on insert holding method for positive, repeatable insert location\u003c\/li\u003e\n\u003cli\u003eAccepts CC..32.5. inserts with 0.375-inch (3\/8-inch) inscribed circle\u003c\/li\u003e\n\u003cli\u003e0.625 x 0.630 inch square shank fits standard toolpost and turret pockets\u003c\/li\u003e\n\u003cli\u003eSteel construction for rigidity and durability under continuous cutting loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with CC..32.5. series indexable inserts (complete designation CC.. 3252) having a 3\/8-inch inscribed circle. Designed as an OEM-style screw-on toolholder for use in standard square-shank turning toolpost and turret applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis toolholder is installed by machinists and CNC setup technicians. Power down and lock out the machine spindle before changing the toolholder or indexing inserts. Seat the shank fully and evenly in the toolpost or turret pocket before tightening the clamping screws to the tool manufacturer's specified torque range for the pocket type. Inspect the insert seat and screw for wear or debris before seating a new insert to ensure proper insert location and prevent premature edge failure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: SCLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: CC..32.5. (CC.. 3252)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.630 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 0.620 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.750 inches (3\/4 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.535 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1094484\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728407822642,"sku":"1094484","price":136.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0227df9531292f0721c06a86d909fa34.jpg?v=1788690918","url":"https:\/\/voomisupply.com\/products\/kennametal-1094484-turning-toolholder-left-hand-sclc","provider":"Voomi Supply","version":"1.0","type":"link"}