{"product_id":"kennametal-1083036-mwln-turning-toolholder-1x1-inch-shank","title":"Kennametal 1083036 Mwln Turning Toolholder 1x1 Inch Shank","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1083036 is a right-hand MWLN-style indexable turning toolholder built for external turning operations on CNC and manual lathes. It features a negative rake angle of -5 degrees and accepts WN..43. series inserts secured by a clamp and screw holding method. The 1 x 1 inch square shank fits a wide range of standard tool blocks and quick-change toolpost systems. At 5 inches overall length and weighing approximately 1.45 pounds, this steel-bodied holder is part of the Kennametal Kenloc series, designed for rigidity and repeatability in production turning applications. It is installed by machinists and tool crib technicians in metalworking environments.\u003c\/p\u003e\u003cp\u003eThis toolholder is suited for external longitudinal and facing operations on turning centers and engine lathes. The negative rake geometry provides stronger cutting edges and is well matched to harder workpiece materials and interrupted cut conditions. The Kenloc series clamping system provides secure insert retention under high cutting forces. Coolant-through capability is not included on this model. Typical applications include production machining of ferrous and non-ferrous metals in both job shop and manufacturing environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRight-hand cut orientation for standard external turning setups\u003c\/li\u003e\n\u003cli\u003eNegative 5 degree rake angle for robust edge strength on difficult materials\u003c\/li\u003e\n\u003cli\u003eAccepts WN..43. series inserts (WN.. 432 complete compatibility)\u003c\/li\u003e\n\u003cli\u003eClamp and screw insert holding method for secure, repeatable seating\u003c\/li\u003e\n\u003cli\u003e1 x 1 inch square steel shank for broad toolpost compatibility\u003c\/li\u003e\n\u003cli\u003ePart of the Kennametal Kenloc series for consistent clamping performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to accept WN..43. series inserts, with complete insert compatibility listed as WN.. 432. The 1 x 1 inch shank fits standard square-bore tool blocks and quick-change toolpost systems sized for that shank dimension.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis toolholder is installed by qualified machinists following standard turning center or lathe tooling setup procedures. Ensure the machine spindle is fully stopped and the machine is locked out before changing tooling. Secure the shank firmly in the tool block to the torque specification of your toolpost manufacturer. Verify insert seating and clamp tightness before initiating a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: MWLN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: WN..43. (Complete: WN.. 432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inch (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Kenloc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1083036\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51728568254770,"sku":"1083036","price":173.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ca59418f756e6d8b610d693acd156bb8.jpg?v=1788693440","url":"https:\/\/voomisupply.com\/products\/kennametal-1083036-mwln-turning-toolholder-1x1-inch-shank","provider":"Voomi Supply","version":"1.0","type":"link"}