{"product_id":"kennametal-1021589-flag-handle-driver-t5-torx","title":"Kennametal 1021589 Flag Handle Driver T5 Torx","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe KENNAMETAL 1021589 is a flag-handle driver designed for tightening and loosening insert screws on indexable boring bars. The driver uses a T5 Torx drive interface, which provides secure bit engagement and reduces the risk of cam-out during screw seating. This tool is a hand-held accessory used during insert changes and routine toolholder maintenance on CNC lathes and boring operations. Licensed machinists and toolroom technicians keep this driver at the machine to support fast, repeatable indexable insert swaps without reaching for a general-purpose wrench or screwdriver set.\u003c\/p\u003e\n\u003cp\u003eThis driver is intended for use with boring bar toolholders in the E-SWLP style family. It is compatible with MS1438 insert screws and suits inserts in the WP 1.51.21 complete insert family. Typical use is in production turning and boring environments where indexable inserts are changed frequently and a dedicated, correctly sized driver reduces the chance of stripping screw heads or damaging seating surfaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eT5 Torx drive for precise, cam-out-resistant engagement on insert screws\u003c\/li\u003e\n  \u003cli\u003eFlag-handle design allows controlled torque application in tight machine envelope conditions\u003c\/li\u003e\n  \u003cli\u003eCompatible with MS1438 insert screws used in indexable boring bar systems\u003c\/li\u003e\n  \u003cli\u003eFits E-SWLP toolholder style for targeted compatibility\u003c\/li\u003e\n  \u003cli\u003eCompact, single-piece construction suited for on-machine storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with E-SWLP toolholder style boring bars. Designed for use with MS1438 insert screws and WP 1.51.21 complete insert series. Verify screw head size and drive type before use with other toolholder families.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis driver is used by machinists and toolroom technicians during indexable insert changes on boring bars. Before changing inserts, ensure the machine is in an e-stop or fully powered-down state and the spindle is locked. Use only the correct T5 Torx driver to avoid rounding the screw head. Apply steady hand pressure rather than impact force when seating or loosening insert screws.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Type\u003c\/strong\u003e: Torx\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorx Size\u003c\/strong\u003e: T5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Flag Handle Driver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndexable Tool Type\u003c\/strong\u003e: Boring Bar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style Compatibility\u003c\/strong\u003e: E-SWLP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware Compatibility\u003c\/strong\u003e: Insert Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew Compatibility\u003c\/strong\u003e: MS1438\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Insert Compatibility\u003c\/strong\u003e: WP 1.51.21\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0042 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27111700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1021589\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51746601632050,"sku":"1021589","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/01a3a0c2acb91aabf01ed461e6815ff1.jpg?v=1788871660","url":"https:\/\/voomisupply.com\/products\/kennametal-1021589-flag-handle-driver-t5-torx","provider":"Voomi Supply","version":"1.0","type":"link"}