{"product_id":"kennametal-1015334-da200-double-angle-collet-chuck","title":"Kennametal 1015334 DA200 Double Angle Collet Chuck","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe KENNAMETAL 1015334 is a double angle collet chuck with a straight shank, designed for use with DA200-series collets in CNC machining and manual milling applications. It features a 1.69-inch projection and a total indicated runout (TIR) of 0.0001 inches (0.0025 mm), making it well-suited for precision toolholding where concentricity is critical. Through-spindle coolant capability is built in, supporting high-efficiency metal removal with flood or coolant-through tooling. The chuck is balanced to 8,000 RPM and actuated with a standard wrench, keeping setup straightforward for machinists and toolroom technicians.\u003c\/p\u003e\u003cp\u003eThis collet chuck is used in vertical and horizontal machining centers, milling machines, and CNC lathes where DA200-series collets are the specified toolholding standard. It accommodates a collet capacity range from 1\/64 inch minimum to 25\/64 inch maximum, covering a broad range of small-diameter end mills, drills, and reamers. The straight shank diameter of 3\/4 inch and a shank length of 3.00 inches fit standard spindle bores and toolholding blocks found in light-duty production and toolroom environments. Licensed machinists and CNC setup technicians are the typical end users.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDA200 collet series compatibility for wide tooling interchangeability\u003c\/li\u003e\n\u003cli\u003eTIR of 0.0001 inches (0.0025 mm) for high-precision concentricity\u003c\/li\u003e\n\u003cli\u003eThrough-spindle coolant support via close-center nose type\u003c\/li\u003e\n\u003cli\u003eBalanced to 8,000 RPM for stable operation at moderate spindle speeds\u003c\/li\u003e\n\u003cli\u003eWrench-actuated design using a 3\/4-inch hex for fast, reliable clamping\u003c\/li\u003e\n\u003cli\u003eStraight shank at 3\/4-inch diameter for broad spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with DA200-series double angle collets. Fits machines equipped with a 3\/4-inch straight shank spindle bore or toolholding block accepting this shank configuration. Collet capacity range of 1\/64 inch to 25\/64 inch.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Power down and lock out the machine spindle before installing or removing the collet chuck. Use the correct 3\/4-inch hex wrench on the actuator when seating or releasing collets, and verify TIR with a dial indicator after installation. Consult the machine tool manufacturer's documentation for spindle torque and drawbar engagement requirements specific to the host machine.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet System\u003c\/strong\u003e: Double Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Series\u003c\/strong\u003e: DA200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection\u003c\/strong\u003e: 1.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.69 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Collet Capacity\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Collet Capacity\u003c\/strong\u003e: 25\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR\u003c\/strong\u003e: 0.0001 inches (0.0025 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced To\u003c\/strong\u003e: 8,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Type\u003c\/strong\u003e: Through-Spindle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Type\u003c\/strong\u003e: Close-Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Diameter\u003c\/strong\u003e: 0.84 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type\u003c\/strong\u003e: Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: KENNAMETAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1015334\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KENNAMETAL","offers":[{"title":"Default Title","offer_id":51744480493874,"sku":"1015334","price":216.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/31eea337b47a3fd46d01cf77de8e9fd4.jpg?v=1788857143","url":"https:\/\/voomisupply.com\/products\/kennametal-1015334-da200-double-angle-collet-chuck","provider":"Voomi Supply","version":"1.0","type":"link"}