{"product_id":"ives-711ht-83-us32d-continuous-hinge-83-in-satin-ss","title":"Ives 711HT 83 US32D Continuous Hinge 83 in Satin Ss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IVES 711HT 83 US32D is a heavy-duty pin and barrel continuous hinge built for high-traffic commercial door openings. This UL Listed hinge spans 83 inches in height and uses a swing clear flush mount design that allows the door to open fully clear of the frame, providing unobstructed passage for carts, wheelchairs, and equipment. Hospital tips give each leaf a smooth, radiused end for a clean finished appearance. The hinge is constructed from stainless steel with a US32D \/ 630 satin stainless steel finish that resists corrosion in demanding service environments. Non-handed design means no left- or right-hand designation is required at the time of order.\u003c\/p\u003e\n\u003cp\u003eThis hinge is intended for commercial and institutional applications including healthcare facilities, schools, and high-use public buildings. It is rated for square edge doors 1-3\/4 inches thick and up to 48 inches wide. The swing clear geometry increases net clear opening width compared to standard butt hinges, making it well suited for ADA-compliant openings and corridors where equipment traffic is routine. Installation is typically performed by a commercial door and hardware technician or finish carpenter working on hollow metal or wood door frames.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL Listed construction for use on rated commercial door openings\u003c\/li\u003e\n  \u003cli\u003eSwing clear flush mount design maximizes net clear opening width\u003c\/li\u003e\n  \u003cli\u003e83-inch hinge height provides full-length door support and load distribution\u003c\/li\u003e\n  \u003cli\u003eHospital tips deliver a smooth, finished profile at each leaf end\u003c\/li\u003e\n  \u003cli\u003eNon-handed design eliminates handing errors during ordering and installation\u003c\/li\u003e\n  \u003cli\u003eUS32D \/ 630 satin stainless steel finish for corrosion resistance in institutional environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for 1-3\/4-inch thick square edge doors up to 48 inches wide. Suitable as a full-length continuous hinge replacement on commercial hollow metal and wood doors in high-traffic institutional openings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed door hardware technician or qualified carpenter familiar with commercial door and frame assemblies. Ensure the door and frame are properly aligned before fastening the hinge leaves to avoid binding. All power to any electrified hardware associated with the opening should be disconnected before service. Follow applicable building codes and the door manufacturer's requirements for fastener type and spacing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinge Type\u003c\/strong\u003e: Pin and Barrel Continuous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinge Height\u003c\/strong\u003e: 83 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDoor Thickness\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDoor Edge Type\u003c\/strong\u003e: Square Edge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Door Width\u003c\/strong\u003e: 48 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Type\u003c\/strong\u003e: Swing Clear Flush Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Style\u003c\/strong\u003e: Hospital Tips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHanding\u003c\/strong\u003e: Non-Handed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: US32D \/ 630 Satin Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IVES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 711HT 83 US32D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IVES","offers":[{"title":"Default Title","offer_id":68633711837490,"sku":"711HT 83 US32D","price":771.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9366a293b53d456a3f51e075f288f2b5.png?v=1794367062","url":"https:\/\/voomisupply.com\/products\/ives-711ht-83-us32d-continuous-hinge-83-in-satin-ss","provider":"Voomi Supply","version":"1.0","type":"link"}