{"product_id":"iscar-6403885-thread-mill-tip-0-618-in-3-flute-carbide","title":"Iscar 6403885 Thread Mill Tip 0.618 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6403885 is a replaceable carbide milling tip designed for thread milling operations in the Multimaster and SolidThread modular tooling systems. This tip carries the full designation MM TRD16-M60-05P-3T06 and features a 0.618-inch cutting diameter with a 90-degree included angle and a 90-degree lead angle. The substrate is sub-micrograin carbide with a TiAlN coating applied via PVD process, delivering wear resistance and thermal stability across a broad range of workpiece materials. Three flutes provide balanced chip evacuation during threading passes. Licensed HVAC, plumbing, and electrical trades do not apply here — this part is installed by machinists and CNC tooling technicians in metalworking environments.\u003c\/p\u003e\n\u003cp\u003eThis thread milling tip is suited for right-hand thread milling on steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials (ISO material codes P, M, K, N, S, and H). It fits into the Multimaster and SolidThread modular quick-change system, making it a practical choice for production threading operations where tip replacement is preferred over full tool replacement. Insert size designation is D16-M60-05P. Coolant-through capability is not available on this tip. It conforms to ANSI standards and carries the IC528 grade designation in the ISCAR catalog.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSub-micrograin carbide substrate for toughness and edge integrity in interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating via PVD process for elevated hot hardness and oxidation resistance\u003c\/li\u003e\n  \u003cli\u003eThree flutes with no chipbreaker geometry — optimized for threading pass chip flow\u003c\/li\u003e\n  \u003cli\u003e90-degree lead angle and 90-degree included angle for standard thread profile milling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting orientation\u003c\/li\u003e\n  \u003cli\u003eCompatible with Multimaster and SolidThread modular tooling platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the ISCAR Multimaster and SolidThread modular tooling systems. Insert size D16-M60-05P. Verify arbor and body compatibility before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before seating or removing the milling tip. Follow the torque and seating procedure specified in the ISCAR Multimaster tooling documentation for the corresponding arbor body — do not use generic torque values. Inspect the seating interface and locating features for debris or damage before mounting the tip.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.618 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide (Sub-Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: D16-M60-05P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: None\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Multimaster \/ SolidThread\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.033 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6403885\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51732690927922,"sku":"6403885","price":170.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3943facee086960e59b12c05e180a502.jpg?v=1788745757","url":"https:\/\/voomisupply.com\/products\/iscar-6403885-thread-mill-tip-0-618-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}