{"product_id":"iscar-6402825-grooving-insert-0-1063-in-solid-carbide","title":"Iscar 6402825 Grooving Insert 0.1063 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6402825 is a solid carbide grooving insert from the Cut-Grip series, designed for precise external and internal grooving operations on CNC lathes and turning centers. It carries a TiAlN PVD coating over a submicron carbide substrate in grade IC908, delivering wear resistance and thermal stability across a wide range of workpiece materials. The cutting width is 0.1063 inches (2.70 mm), the corner radius is 0.0039 inches (0.10 mm), and the rake angle is 8 degrees positive. The insert uses a double-end configuration with a clamp-style holding method and a P-style chip breaker. Machinists and CNC programmers working in job shops or production turning environments will specify this insert for repeatable groove geometry and reliable chip control.\u003c\/p\u003e\n\u003cp\u003eThis insert is rated for universal primary workpiece material compatibility, covering ISO material groups H, K, M, P, and S. That range includes steel, stainless steel, cast iron, hardened materials, and high-temperature alloys. The neutral hand orientation makes it straightforward to position in standard Cut-Grip toolholders. It is well suited to both light-production and high-mix turning applications where a single insert grade needs to handle varied material types without a toolholder change. The double-end design extends usable insert life before disposal.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide submicron substrate in IC908 grade for toughness and edge retention\u003c\/li\u003e\n  \u003cli\u003eTiAlN PVD coating provides thermal resistance and reduced built-up edge across ISO material groups\u003c\/li\u003e\n  \u003cli\u003e0.1063 inch (2.70 mm) cutting width with a 0.0039 inch (0.10 mm) corner radius for tight groove tolerances\u003c\/li\u003e\n  \u003cli\u003e8-degree positive rake angle reduces cutting forces on workpiece and spindle\u003c\/li\u003e\n  \u003cli\u003eDouble-end insert design doubles available cutting edges per insert\u003c\/li\u003e\n  \u003cli\u003eP-style chip breaker promotes controlled chip formation in grooving applications\u003c\/li\u003e\n  \u003cli\u003eCompliant with ISO 13399 insert identification standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in ISCAR Cut-Grip series clamping toolholders that accept GIPI-style grooving inserts with a 270010 insert size code. Verify toolholder seat geometry and insert pocket specifications before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of grooving inserts is performed by qualified CNC machinists or toolroom technicians. Power down and lock out the machine spindle before seating or replacing inserts. Ensure the clamping screw and insert pocket are free of chips and debris before seating the insert to achieve proper registration and avoid micro-fracture of the cutting edge. Inspect the chip breaker and cutting edges under magnification before use; do not install an insert with visible edge damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GIPI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 270010\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.1063 inches (2.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0039 inches (0.10 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.6181 inches (15.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 0.1063 inches (2.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 8 degrees positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (ISO groups H, K, M, P, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Cut-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6402825\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51733144043826,"sku":"6402825","price":494.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cbc032481e48b22ae7ffe4204e9e3c0d.jpg?v=1788751848","url":"https:\/\/voomisupply.com\/products\/iscar-6402825-grooving-insert-0-1063-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}