{"product_id":"iscar-6402797-grooving-insert-ic908-10mm-cut-grip","title":"Iscar 6402797 Grooving Insert IC908 10mm Cut-grip","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6402797 is a solid carbide grooving insert from the Cut-Grip series, designed for external and face grooving operations on CNC lathes and turning centers. It carries the IC908 manufacturer grade with a PVD-applied TiAlN coating, which provides thermal resistance and wear life across a broad range of workpiece materials. The insert features a neutral hand orientation, a 10 mm cutting width, and a maximum depth of cut of 6 mm. A positive rake geometry with a 7-degree rake angle and an F-style chip breaker promote controlled chip evacuation and reduced cutting forces. Licensed machinists and CNC operators working in production and job-shop environments are the primary installers of this insert.\u003c\/p\u003e\u003cp\u003eThis insert is suited for grooving applications across universal workpiece materials including steels, stainless steels, cast irons, non-ferrous alloys, and heat-resistant superalloys, as indicated by material grade codes C1, C2, C6, and C7 and ISO workpiece material codes H, K, M, P, and S. The Cut-Grip series is commonly applied in medium to high-volume turning operations where consistent groove geometry and dimensional repeatability are required. The 0.80 mm corner radius and single-end design make it appropriate for precision groove profiles where edge geometry must remain predictable across a full production run.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIC908 grade with PVD TiAlN coating for extended tool life across multiple material classes\u003c\/li\u003e\n\u003cli\u003e10 mm cutting width with a maximum depth of cut of 6 mm\u003c\/li\u003e\n\u003cli\u003ePositive rake angle of 7 degrees reduces cutting forces and heat generation\u003c\/li\u003e\n\u003cli\u003eF-style chip breaker promotes controlled chip formation and evacuation\u003c\/li\u003e\n\u003cli\u003e0.80 mm corner radius supports clean groove-bottom geometry\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation provides flexible setup on standard Cut-Grip toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct application insert for ISCAR Cut-Grip series grooving toolholders accepting GIF-style inserts with a 1000080 insert size designation. Verify toolholder seat specifications before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert installation and indexing should be performed by a qualified machinist or CNC tooling technician. Power down the machine and engage the spindle lock before changing inserts. Use the appropriate torque wrench and insert key specified by the toolholder manufacturer to secure the clamping screw — do not overtighten. Inspect the toolholder seat for chips or wear before seating the new insert, as debris on the seating surface will affect insert stability and groove accuracy.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GIF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 10 mm (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 6 mm (0.2362 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut Range\u003c\/strong\u003e: 5 mm to 10 mm (0.2000 to 0.3000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.80 mm (0.0315 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.1811 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Cut-Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (H, K, M, P, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C1, C2, C6, C7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6402797\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51730417713458,"sku":"6402797","price":868.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/14be6e49be1062c600d8115ccdfcfca4.jpg?v=1788717094","url":"https:\/\/voomisupply.com\/products\/iscar-6402797-grooving-insert-ic908-10mm-cut-grip","provider":"Voomi Supply","version":"1.0","type":"link"}