{"product_id":"iscar-6400459-grooving-insert-gimf608f-ic20-solid-carbide","title":"Iscar 6400459 Grooving Insert GIMF608F IC20 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6400459 is a solid carbide grooving insert in the Cut-Grip series, designed for precision external and internal grooving operations on CNC lathes and turning centers. Carrying the GIMF608F designation with an IC20 uncoated carbide grade, this insert delivers a 6 mm cutting width and a maximum depth of cut of 3.60 mm. The neutral hand orientation and positive 7-degree rake angle reduce cutting forces and support clean chip evacuation across a wide range of workpiece materials. Machining professionals in production and job-shop environments install this insert as a direct replacement in compatible Cut-Grip toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert suits universal workpiece materials classified under ISO material groups H, K, M, N, and S, making it adaptable for grooving steel, stainless steel, cast iron, non-ferrous alloys, and high-temperature alloys. It is well matched to general turning and parting applications where consistent groove geometry and tight depth control are required. The IC20 uncoated grade performs particularly well in light to medium-duty interrupted cuts and finish grooving passes where a sharp cutting edge is a priority. A single-end configuration is standard, and the insert is sold individually with a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6 mm cutting width with a maximum depth of cut of 3.60 mm\u003c\/li\u003e\n  \u003cli\u003eIC20 uncoated solid carbide grade suitable for universal workpiece materials\u003c\/li\u003e\n  \u003cli\u003ePositive 7-degree rake angle reduces cutting forces and promotes chip flow\u003c\/li\u003e\n  \u003cli\u003e0.80 mm corner radius supports controlled groove geometry without a full radius profile\u003c\/li\u003e\n  \u003cli\u003eF chip breaker geometry optimized for finish-grooving chip control\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 insert identification standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in ISCAR Cut-Grip series toolholders that accept the GIMF 608 insert size. Verify holder pocket specifications against the GIMF insert style and 608 size code before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert seating and clamping should be performed by a qualified machinist following the toolholder manufacturer torque and clamping guidelines. Power down and lock out the machine spindle before changing inserts. Inspect the pocket seat for chips or debris before seating the new insert, as contamination will affect cutting edge alignment and surface finish. Do not exceed the rated maximum depth of cut for this insert grade and geometry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 6 mm (0.2362 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 3.60 mm (0.1417 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.80 mm (0.0315 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.5940 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GIMF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 608\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Cut-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (H, K, M, N, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6400459\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51729107616050,"sku":"6400459","price":230.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9bb8484b387f9b1fde1cb8142d31c985.jpg?v=1788700089","url":"https:\/\/voomisupply.com\/products\/iscar-6400459-grooving-insert-gimf608f-ic20-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}