{"product_id":"iscar-6200337-grooving-insert-grip4004hg-y-ic8250-4mm","title":"Iscar 6200337 Grooving Insert GRIP4004HG-Y IC8250 4mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6200337 is a double-ended solid carbide grooving insert in the Heli-Grip series, designed for external grooving and parting operations on CNC turning centers and lathes. It carries a CVD-deposited Al2O3 coating under the IC8250 manufacturer grade, a wear-resistant classification engineered for elevated cutting temperatures generated in steel and stainless steel applications. The insert measures 19.00 mm (0.748 inches) in overall length with a 4.00 mm cutting width and a maximum depth of cut of 2.40 mm. Corner radius is 0.40 mm. Its neutral hand orientation makes it straightforward to apply in standard right-hand toolholders without re-indexing the setup. Machinists and CNC operators in job-shop and production environments install and index this insert as part of routine tooling maintenance.\u003c\/p\u003e\n\u003cp\u003eThe ISCAR 6200337 is suited for grooving, parting, and recessing operations on stainless steel and carbon steel workpieces, the two primary material groups it is rated for under ISO material codes M and P. The Heli-Grip series it belongs to uses a clamp-style holding method, which keeps the insert seated securely under interrupted cuts and varying feed rates. Its double-ended design allows two usable cutting edges per insert, extending tool life per unit. The chip breaker designation HG-Y is matched to this series for controlled chip formation in moderate to tough cutting conditions on ferrous materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-ended insert with two usable cutting edges per piece\u003c\/li\u003e\n  \u003cli\u003eCVD Al2O3 coating under IC8250 grade for heat and wear resistance in steel and stainless steel\u003c\/li\u003e\n  \u003cli\u003e4.00 mm cutting width with a maximum depth of cut range of 2.00 mm to 3.00 mm\u003c\/li\u003e\n  \u003cli\u003e0.40 mm corner radius for controlled groove geometry\u003c\/li\u003e\n  \u003cli\u003eClamp-style holding method (GRIP system) for rigid seating in Heli-Grip toolholders\u003c\/li\u003e\n  \u003cli\u003eCompliant with ISO 13399 cutting tool data representation standards\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation compatible with standard turning setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Heli-Grip series clamp-style toolholders that accept the GRIP 4004 insert size. Rated for primary workpiece materials stainless steel (ISO code M) and steel (ISO code P).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC tooling technician. Always power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate torx or hex key specified by the toolholder manufacturer to secure the clamp to the correct seating torque per the toolholder documentation. Inspect the insert pocket and clamp for chips or debris before seating the new insert to ensure full, flat contact and prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 4.00 mm (0.1575 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 2.40 mm (0.0945 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut Range\u003c\/strong\u003e: 2.00 mm to 3.00 mm (0.0750 to 0.1000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.40 mm (0.0157 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 19.00 mm (0.748 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 4.00 mm (0.1575 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC8250\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Al2O3 (CVD process)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: HG-Y\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GRIP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 4004Y\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Heli-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Steel (ISO codes M, P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6200337\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51743647203634,"sku":"6200337","price":498.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/33007be026102c38171b53841890a780.jpg?v=1788848940","url":"https:\/\/voomisupply.com\/products\/iscar-6200337-grooving-insert-grip4004hg-y-ic8250-4mm","provider":"Voomi Supply","version":"1.0","type":"link"}