{"product_id":"iscar-6154732-solid-carbide-jobber-drill-5-50-mm-tialn","title":"Iscar 6154732 Solid Carbide Jobber Drill 5.50 Mm Tialn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6154732 is a solid carbide jobber-length drill designed for high-performance holemaking in demanding materials. Built to DIN 6537 specification, it features a 5.50 mm cutting diameter with a 140-degree point angle and a TiAlN coating that extends tool life in abrasive and high-heat cutting conditions. The overall length is 66.00 mm with a 28.00 mm flute length, giving a 3xD flute-to-diameter ratio suited to moderate-depth holes. The straight cylindrical shank measures 6 mm in diameter and 36 mm in length. This drill belongs to the ISCAR SCD-AP3N series and is manufactured from fine-grain carbide for edge stability and wear resistance. It is installed by machinists and toolroom technicians in CNC and manual drilling operations.\u003c\/p\u003e\n\u003cp\u003eThe 6154732 is rated for use across a broad range of primary workpiece materials including steel, stainless steel, cast iron, aluminum and non-ferrous alloys, hardened materials, and high-temperature alloys. The right-hand, regular spiral flute geometry supports chip evacuation in these varied materials. With a maximum drilling depth of 20.00 mm and a drill point length of 0.90 mm, it is suited to short-to-moderate blind and through-hole operations in production and job-shop environments where consistent diameter tolerance to h6 is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid fine-grain carbide construction for edge stability in hard and abrasive workpiece materials\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating improves heat resistance and extends tool life in steel, stainless, and high-temp alloys\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle reduces entry thrust and improves self-centering on flat and curved surfaces\u003c\/li\u003e\n  \u003cli\u003eh6 diameter tolerance provides close-fit hole accuracy without reaming in many applications\u003c\/li\u003e\n  \u003cli\u003eDIN 6537 and ISO 13399 compliant for standardized tool data integration with CAM and presetter systems\u003c\/li\u003e\n  \u003cli\u003e3xD flute ratio balances chip clearance and core strength for general-purpose depth requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard straight-shank toolholders and drill chucks accepting a 6 mm shank diameter. Rated for steel (P), stainless steel (M), cast iron (K), aluminum and non-ferrous (N), hardened materials (H), and high-temperature alloys (S) per ISO material group classification. Part of the ISCAR SCD-AP3N series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis drill is installed by qualified machinists or toolroom technicians in CNC machining centers or drill presses equipped with a compatible straight-shank toolholder or keyed chuck. Ensure the machine spindle is fully stopped and locked out before changing tooling. Secure the shank to the full recommended grip depth in the holder to prevent pullout under cutting loads. Coolant-through is not supported on this drill; apply external cutting fluid appropriate to the workpiece material when operating at elevated speeds or feed rates.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5.50 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 66.00 mm (2.5984 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 28.00 mm (1.1024 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 36 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 0.90 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 20.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute By Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide, Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SCD-AP3N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: DIN 6537\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous, Hardened Materials, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6154732\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51727237316914,"sku":"6154732","price":138.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4168e6e9c5ab1f0c94d0ad89391c9830.jpg?v=1788675179","url":"https:\/\/voomisupply.com\/products\/iscar-6154732-solid-carbide-jobber-drill-5-50-mm-tialn","provider":"Voomi Supply","version":"1.0","type":"link"}