{"product_id":"iscar-6093335-cutoff-insert-penta24n300pf020-ic908-carbide","title":"Iscar 6093335 Cutoff Insert PENTA24N300PF020 IC908 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6093335 is a solid carbide cutoff and grooving insert using the PENTA24N300PF020 geometry in the IC908 manufacturer grade. It features a 3 mm (0.118 inch) cutting width, a 0-degree neutral lead angle, and a PF chipbreaker profile designed to manage chip flow in demanding parting and grooving operations. The insert is held in place by a screw-clamp method and carries a PVD coating applied over a submicron solid carbide substrate. A 0.20 mm corner radius and a 7-degree relief angle round out the key cutting geometry. This insert is installed and replaced by machinists and CNC tooling technicians on lathes and turning centers.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for grooving and parting applications across a wide range of workpiece materials, including steels, stainless steels, cast irons, high-temperature alloys, and non-ferrous materials, as indicated by the primary workpiece material codes H, K, M, P, and S. It fits into the PentaCut insert series toolholders and is appropriate for both production turning centers and manual lathes where controlled chip formation and consistent groove width are required. Maximum depth of cut is 6.50 mm (0.256 inch), making it suitable for moderate-diameter parting and profiling work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with PVD coating over a submicron substrate for extended tool life\u003c\/li\u003e\n  \u003cli\u003e3 mm cutting width (0.118 inch) with 0.20 mm corner radius for precise groove geometry\u003c\/li\u003e\n  \u003cli\u003eIC908 grade with universal material compatibility across H, K, M, P, and S ISO material groups\u003c\/li\u003e\n  \u003cli\u003ePF chipbreaker profile promotes controlled chip evacuation in grooving and parting cuts\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and neutral hand orientation for flexible toolholder mounting\u003c\/li\u003e\n  \u003cli\u003eScrew-clamp insert holding method provides secure seating under interrupted or continuous cuts\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 6.50 mm (0.256 inch) supports a range of parting and grooving applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with PentaCut series screw-clamp toolholders that accept the PENTA 24N insert size. Compatible with workpiece material ISO codes H, K, M, P, and S per ISO 13399. Verify toolholder bore and clamping slot dimensions before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert replacement should be performed by a qualified machinist or CNC tooling technician with the machine in a locked-out, de-energized state. Use the correct torx or hex key specified by the toolholder manufacturer to achieve proper screw-clamp torque without overtightening. Inspect the insert pocket and clamping screw for wear or debris before seating the new insert. Confirm cutting parameters against the IC908 grade recommendations in the ISCAR catalog before resuming production.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: PENTA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 24N300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.118 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 6.50 mm (0.256 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.008 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: PF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide, Submicron Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: PVD coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Grooving, Parting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H, K, M, P, S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: PentaCut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.128 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6093335\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51737265307954,"sku":"6093335","price":443.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ffc8063c8bf7040d80ff9a597a377376.jpg?v=1788786362","url":"https:\/\/voomisupply.com\/products\/iscar-6093335-cutoff-insert-penta24n300pf020-ic908-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}