{"product_id":"iscar-6011370-dgn3102c-ic830-carbide-cutoff-insert","title":"Iscar 6011370 DGN3102C IC830 Carbide Cutoff Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6011370 is a double-ended solid carbide cutoff and grooving insert from the Do-Grip series, identified by catalog designation DGN 3102C with manufacturer grade IC830. This insert delivers a 3.1 mm cutting width and is engineered for demanding grooving and parting operations on superalloys, steels, and stainless materials. The PVD coating process produces the IC830 grade, which provides elevated wear resistance and edge toughness at the cutting zone. A 7-degree relief angle and a 0.20 mm corner radius are built into the geometry to support clean, consistent chip formation. Licensed machinists and CNC turning specialists install this insert into compatible Do-Grip clamping toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert suits parting-off and external grooving operations on CNC lathes and turning centers in both production and job-shop environments. Its primary target workpiece materials are superalloys and steels, covering ISO material codes M, P, and S. The double-ended design allows both ends to be placed into service, extending useful life per insert. A maximum depth of cut of 18.00 mm makes it suitable for moderate-diameter parting work as well as recessing and grooving cycles where controlled chip evacuation is critical. The C-style chipbreaker geometry supports chip control across a range of feed rates typical for these material groups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-ended insert — both ends usable, maximizing value per piece\u003c\/li\u003e\n  \u003cli\u003eIC830 grade with PVD coating for elevated wear resistance on superalloys and steels\u003c\/li\u003e\n  \u003cli\u003e3.1 mm cutting width with a 0.20 mm corner radius for precise groove dimensions\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle reduces rubbing and supports clean parting-off cuts\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut: 18.00 mm — compatible with moderate-diameter parting operations\u003c\/li\u003e\n  \u003cli\u003eC-style chipbreaker promotes chip control in grooving and parting applications\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 cutting tool data standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Do-Grip series clamping toolholders that accept DGN insert style with insert seat size 2. Suitable for grooving and parting operations on workpiece materials classified under ISO codes M, P, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and the turret is in a safe indexed position before seating or replacing the insert. Use the appropriate Do-Grip clamping mechanism to secure the insert firmly; do not substitute non-series clamps, as improper clamping can cause insert movement or breakage under cutting loads. Verify insert seating and clamp engagement before resuming any cutting cycle.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DGN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Do-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC830\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.10 mm (0.1220 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 18.00 mm (0.7087 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 20.10 mm (0.7913 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0080 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD, Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloy (ISO codes M, P, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Grooving, Parting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.075 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6011370\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51736657822002,"sku":"6011370","price":423.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/37f2d621803260b5b44f657dbee04f10.jpg?v=1788779238","url":"https:\/\/voomisupply.com\/products\/iscar-6011370-dgn3102c-ic830-carbide-cutoff-insert","provider":"Voomi Supply","version":"1.0","type":"link"}