{"product_id":"iscar-6004465-cutoff-insert-1-4mm-tang-grip-carbide","title":"Iscar 6004465 Cutoff Insert 1.4mm Tang-grip Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6004465 is a solid carbide cutoff and grooving insert in the Tang-Grip series, designed for parting and grooving operations on CNC lathes and turning centers. The insert carries the TAGN1.4J designation, indicating a neutral lead angle, a 1.40 mm (0.0551 inch) cutting width, and a J-style chipbreaker geometry. The IC808 grade combines a PVD-applied multilayer coating of TiAlN, AlTiN, and TiN over a tough carbide substrate, delivering wear resistance and edge stability across a wide range of workpiece materials. Installed by machinists and toolroom technicians, this insert is a direct drop-in for compatible Tang-Grip toolholders without secondary modification.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for grooving and parting applications in both light and production turning environments. The neutral lead angle and J chipbreaker make it effective on materials classified under ISO material groups H, K, M, P, and S, covering hardened steels, cast irons, stainless steels, carbon and alloy steels, and heat-resistant superalloys. The 0.16 mm corner radius and 7-degree relief angle support clean chip evacuation and controlled cutting action at the parting groove. Typical applications include part-off operations, shallow grooving, and recessing on bar-fed and chucked workpieces in job shop and production environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.40 mm (0.0551 inch) cutting width for narrow parting and grooving cuts\u003c\/li\u003e\n  \u003cli\u003eIC808 PVD-coated grade with TiAlN, AlTiN, and TiN multilayer coating for extended tool life\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle with J chipbreaker geometry for controlled chip formation\u003c\/li\u003e\n  \u003cli\u003e0.16 mm corner radius and 7-degree relief angle support clean parting grooves\u003c\/li\u003e\n  \u003cli\u003eCompatible with ISO material groups H, K, M, P, and S — broad workpiece material coverage\u003c\/li\u003e\n  \u003cli\u003eSingle-end insert; sold individually, minimum order quantity of 10 units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Tang-Grip series toolholders that accept the TAG insert style with a 1.4 size code. Compatible workpiece material groups include ISO H, K, M, P, and S. Conforms to ISO 13399 tooling data standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Always index or replace the insert with the machine in the stopped and locked-out state per OSHA lockout\/tagout procedures. Seat the insert fully into the Tang-Grip pocket before applying clamping force; do not force a misaligned insert. Inspect the toolholder pocket for chips or damage before each insert change to maintain accurate seating and prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Designation\u003c\/strong\u003e: TAGN1.4J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC808\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 1.40 mm (0.0551 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 1.40 mm (0.0551 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.16 mm (0.0063 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Tang-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Layers\u003c\/strong\u003e: TiAlN, AlTiN, TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Groups\u003c\/strong\u003e: H, K, M, P, S (ISO)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Grooving, Parting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.015 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6004465\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51728743235890,"sku":"6004465","price":224.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d2d7d706ebec4bf81de963db688b409c.jpg?v=1788695713","url":"https:\/\/voomisupply.com\/products\/iscar-6004465-cutoff-insert-1-4mm-tang-grip-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}