{"product_id":"iscar-6003655-cutoff-insert-2mm-pentacut-ic908-carbide","title":"Iscar 6003655 Cutoff Insert 2mm Pentacut IC908 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6003655 is a solid carbide cutoff and grooving insert designed for the PentaCut system, a multi-edge parting and grooving platform used on CNC lathes and turning centers. This insert carries ISCAR grade IC908, a PVD-coated carbide grade with a TiAlN coating that provides wear resistance and thermal stability across a range of workpiece materials including steels, stainless, cast irons, and high-temperature alloys. The cutting width is 2.00 mm (0.0787 inches), with a right-hand lead angle of 6 degrees and a relief angle of 7 degrees. Corner radius is 0.10 mm. The insert designation PENTA 34R200PB-6D identifies the geometry, size, and lead configuration fully within the PentaCut toolholder system.\u003c\/p\u003e\u003cp\u003eThis insert is used in precision parting, grooving, and cutoff operations on CNC turning equipment in both production and job-shop environments. It is suited for applications requiring a narrow, accurate kerf where chip control and edge life are critical. The 2.00 mm cutting width and right-hand orientation make it a fit for standard right-hand PentaCut toolholders in the 34-series size range. Typical installers are CNC machinists and toolroom technicians working in aerospace, automotive, and general machining applications where tight tolerances on groove width and runout are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIC908 grade: PVD TiAlN-coated solid carbide for extended tool life across steel, stainless, cast iron, and high-temp alloys (material grades C1, C2, C6, C7)\u003c\/li\u003e\n\u003cli\u003e2.00 mm (0.0787 inch) cutting width for precise, narrow parting and grooving\u003c\/li\u003e\n\u003cli\u003e6-degree right-hand lead angle geometry (insert designation PENTA 34R200PB-6D)\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle and 0.10 mm corner radius for controlled chip formation and reduced edge loading\u003c\/li\u003e\n\u003cli\u003ePentaCut system compatibility enables multi-edge usage and secure clamping without screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with ISCAR PentaCut system toolholders in the 34-series size range that accept right-hand lead angle inserts. Confirm toolholder pocket geometry matches the PENTA 34R200 insert seat before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert seating and removal should be performed with the machine in a full-stopped, de-energized state and all axis motion locked out. Use the correct ISCAR PentaCut key or torx driver as specified by the toolholder manufacturer — do not use substitute tools that can damage the pocket or insert seat. Inspect the insert pocket for chips, debris, or wear before seating a new insert; a contaminated pocket will affect insert stability and groove width accuracy. Follow the toolholder manufacturer's recommended insert engagement procedure for the PentaCut system.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: PENTA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 34R200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 6 degrees, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.10 mm (0.0039 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C1, C2, C6, C7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: PentaCut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 (minimum order quantity: 4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6003655\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51732210024754,"sku":"6003655","price":371.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/992ad823aa0e9fba34ce97a7ea1c722f.jpg?v=1788740449","url":"https:\/\/voomisupply.com\/products\/iscar-6003655-cutoff-insert-2mm-pentacut-ic908-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}