{"product_id":"iscar-6003616-cutoff-insert-8mm-tang-grip-solid-carbide","title":"Iscar 6003616 Cutoff Insert 8mm Tang-grip Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6003616 is a single-end carbide cutoff insert designed for parting and slitting operations on CNC lathes and turning centers. Built to the Tang-Grip series standard, it features an 8 mm cutting width (0.3150 inches) and a neutral lead angle, making it suitable for straight-in cutoff work without directional bias. The insert is manufactured from solid carbide grade IC808 with a PVD-applied multilayer coating combining TiAlN, AlTiN, and TiN for improved edge wear resistance and thermal stability. A 7-degree relief angle and 0.50 mm corner radius (0.0197 inches) round out the cutting geometry. Licensed machinists and CNC operators working in production turning environments are the primary installers.\u003c\/p\u003e\u003cp\u003eThis insert is intended for slitting and cutoff applications across a broad range of workpiece materials. The IC808 grade with universal material compatibility covers ferritic and martensitic steels, cast irons, stainless steels, and high-temperature alloys, corresponding to ISO material groups H, K, M, P, and S. The C-style chipbreaker geometry supports chip control during interrupted or continuous cutoff cuts. It is well suited to medium-to-high-production turning environments where consistent parting performance and insert interchangeability are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8 mm cutting width (0.3150 inches) for consistent parting groove dimensions\u003c\/li\u003e\n\u003cli\u003eSolid carbide IC808 grade with PVD coating: TiAlN, AlTiN, and TiN multilayer stack\u003c\/li\u003e\n\u003cli\u003eNeutral lead angle and neutral hand  -  no directional setup required\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle with 0.50 mm corner radius for reduced rubbing and controlled entry\u003c\/li\u003e\n\u003cli\u003eC-style chipbreaker for active chip management in slitting and cutoff cuts\u003c\/li\u003e\n\u003cli\u003eMulti-use compatible across ISO material groups H, K, M, P, and S\u003c\/li\u003e\n\u003cli\u003eConforms to ISO 13399 insert identification standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with ISCAR Tang-Grip series cutoff and grooving toolholders that accept TAG N8C style inserts. Verify toolholder pocket size and clamping style before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert seating and replacement should be performed by a qualified machinist with the machine powered down and the spindle fully locked out per facility lockout\/tagout procedures. Clean the toolholder pocket of chips and debris before seating the insert to ensure full contact and prevent pocket damage. Do not exceed the toolholder manufacturer's recommended depth-of-cut or feed rate for this insert style. Inspect the clamping screw torque and pocket condition at each insert change.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: TAG N8C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Tang-Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC808\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 8 mm (0.3150 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.50 mm (0.0197 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Finish\u003c\/strong\u003e: TiAlN, AlTiN, TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (ISO Groups H, K, M, P, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6003616\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51739285258546,"sku":"6003616","price":412.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9645b6ae100ee92c115ca150a41c0c23.jpg?v=1788812709","url":"https:\/\/voomisupply.com\/products\/iscar-6003616-cutoff-insert-8mm-tang-grip-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}