{"product_id":"iscar-6002714-cutoff-insert-gtr4-15d-ic354-4-1mm","title":"Iscar 6002714 Cutoff Insert GTR4-15D IC354 4.1mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6002714 is a solid carbide cutoff and grooving insert designed for precision parting and grooving operations on CNC lathes and turning centers. This single-end insert carries the GTR4-15D geometry with an IC354 PVD-coated carbide grade, delivering wear resistance suited to steel and alloy workpieces in the C5 and C6 material grade range. The cutting width measures 4.1 mm (0.1614 inches), the lead angle is 15 degrees right-hand, and the corner radius is 0.24 mm (0.0094 inches). It uses a clamp-style holding method and belongs to the Self-Grip series, making it compatible with matching ISCAR Self-Grip toolholders and blades.\u003c\/p\u003e\n\u003cp\u003eThis insert is used in production turning environments where consistent parting depths and clean groove profiles are required. Typical applications include external grooving, cutoff operations, and face grooving on ferrous and non-ferrous materials. The right-hand lead angle suits standard lathe setups where the tool approaches from the right. The PVD coating supports higher cutting speeds and extended tool life in interrupted cuts or when coolant is applied. Machinists and CNC operators in job shops, production facilities, and aerospace or automotive component shops are the primary users.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGTR4-15D insert geometry with 15-degree right-hand lead angle for directed cutting forces\u003c\/li\u003e\n  \u003cli\u003eIC354 PVD-coated solid carbide grade rated for C5 and C6 material groups\u003c\/li\u003e\n  \u003cli\u003e4.1 mm (0.1614 inch) cutting width for consistent groove and parting dimensions\u003c\/li\u003e\n  \u003cli\u003e0.24 mm corner radius for controlled chip formation at groove edges\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle reduces rubbing and supports clean surface finish\u003c\/li\u003e\n  \u003cli\u003eSingle-end design with clamp-style holding for secure, repeatable seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Self-Grip series toolholders and blades that accept size 4 insert seats. Confirm holder compatibility with the GTR4 insert style and size code 4 seat specification before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before seating or removing the insert. Ensure the insert pocket and clamping surfaces are clean and free of chips before seating. Do not exceed the toolholder manufacturer's recommended clamping torque for the clamp screw, and verify insert orientation matches the right-hand cutting direction of the setup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GTR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC354\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5, C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: PVD Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 4.1 mm (0.1614 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 15 degrees, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.24 mm (0.0094 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Grooving, Parting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6002714\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51750703989042,"sku":"6002714","price":274.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/00bef9e54666ecdf7292bd7de62615a8.jpg?v=1788918711","url":"https:\/\/voomisupply.com\/products\/iscar-6002714-cutoff-insert-gtr4-15d-ic354-4-1mm","provider":"Voomi Supply","version":"1.0","type":"link"}