{"product_id":"iscar-6002686-carbide-cutoff-insert-3mm-left-hand","title":"Iscar 6002686 Carbide Cutoff Insert 3mm Left Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6002686 is a solid carbide cutoff and parting insert designed for precision grooving and parting operations on CNC lathes and turning centers. Manufactured under the GFL3W-8D designation in the Self-Grip series, this single-end insert features a 3.00 mm (0.1181 inch) cutting width and a 0.20 mm (0.0079 inch) corner radius. The IC354 grade substrate is applied with a PVD TiCN coating, optimizing edge wear resistance on stainless steel and carbon steel workpieces. The left-hand lead angle of 8 degrees and a 7-degree relief angle support controlled chip flow during parting cuts. Licensed machinists and CNC programmers specify this insert for high-volume production turning cells.\u003c\/p\u003e\u003cp\u003eThis insert is suited for parting and grooving applications on stainless steel and steel workpieces in both production and job-shop turning environments. The W chipbreaker geometry promotes chip curl and evacuation in interrupted or continuous parting cuts. The Self-Grip clamping system secures the insert without additional hardware, reducing setup time on compatible toolholders. It is a single-end insert, meaning each unit provides one cutting edge before replacement.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide substrate with IC354 grade PVD TiCN coating for wear resistance on stainless steel and steel\u003c\/li\u003e\n\u003cli\u003e3.00 mm cutting width (0.1181 inch) for precise parting and grooving slot dimensions\u003c\/li\u003e\n\u003cli\u003eLeft-hand, 8-degree lead angle with 7-degree relief angle for controlled chip direction\u003c\/li\u003e\n\u003cli\u003e0.20 mm corner radius (0.0079 inch) minimizes stress concentration at the cut base\u003c\/li\u003e\n\u003cli\u003eW chipbreaker geometry promotes consistent chip breaking and evacuation\u003c\/li\u003e\n\u003cli\u003eSelf-Grip clamping system — no additional insert-locking hardware required\u003c\/li\u003e\n\u003cli\u003eConforms to ISO 13399 cutting tool data standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement insert for ISCAR Self-Grip series GFL3W-8D toolholders and compatible clamping blocks accepting insert seat size 3. Refer to the ISCAR Self-Grip toolholder selection guide to confirm holder-to-insert fitment before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert installation and replacement should be performed by a qualified machinist or CNC tooling technician with the machine in a safe, powered-down or E-stop state and all spindle motion confirmed stopped. Use the appropriate ISCAR torx or hex key as specified by the toolholder manufacturer to seat the Self-Grip clamp; do not over-torque the clamp screw. Inspect the insert pocket and clamping surfaces for chips or debris before seating the insert to ensure full and flat contact. Dispose of worn carbide inserts in accordance with local metal-waste regulations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC354\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 8 degrees, Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN, PVD Process\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Parting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5, C6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6002686\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51748619747634,"sku":"6002686","price":34.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b3cd37798eb429e8483f7c748a6fbfd3.jpg?v=1788895790","url":"https:\/\/voomisupply.com\/products\/iscar-6002686-carbide-cutoff-insert-3mm-left-hand","provider":"Voomi Supply","version":"1.0","type":"link"}