{"product_id":"iscar-6002516-grooving-insert-gff6-ic354-solid-carbide","title":"Iscar 6002516 Grooving Insert GFF6 IC354 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6002516 is a solid carbide grooving insert designed for precision grooving and parting operations on CNC lathes and turning centers. Carrying the IC354 manufacturer grade with a PVD-applied TiCN coating, this insert delivers wear resistance and surface integrity suited to demanding cutting cycles. The neutral hand orientation and Self-Grip holding method allow secure seating in compatible grooving toolholders. At a cutting width of 0.2362 inches (6.00 mm) and a corner radius of 0.0098 inches (0.25 mm), it is built for consistent groove geometry in production environments. Machinists and CNC operators working in job shops or manufacturing facilities rely on this insert for repeatable results on stainless steel and steel workpieces.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for grooving and cutoff applications on stainless steel and steel workpieces, corresponding to ISO material codes M and P. The 7-degree positive rake angle reduces cutting forces and supports clean chip evacuation, making it well suited for medium to finishing cuts. It is appropriate for both general production turning and close-tolerance groove work where surface finish and dimensional consistency are critical. The GFF6 insert style belongs to the ISCAR Self-Grip series, which is engineered for rigid clamping without additional locking screws.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction in IC354 grade for extended tool life in steel and stainless steel\u003c\/li\u003e\n  \u003cli\u003ePVD TiCN coating provides a hard, low-friction surface for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003e0.2362 inch (6.00 mm) cutting width for consistent groove sizing\u003c\/li\u003e\n  \u003cli\u003e0.0098 inch (0.25 mm) corner radius minimizes stress concentration at groove edges\u003c\/li\u003e\n  \u003cli\u003e7-degree positive rake angle reduces cutting forces and supports chip flow\u003c\/li\u003e\n  \u003cli\u003eSelf-Grip holding method seats securely in compatible toolholders without additional fasteners\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation accommodates standard right-hand grooving setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in ISCAR Self-Grip series grooving toolholders and blade systems that accept the GFF6 insert style and size code 6. Optimized for primary workpiece materials stainless steel (ISO code M) and steel (ISO code P). Conforms to ISO 13399 tooling data standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified CNC machinist or tooling technician with the machine fully stopped and locked out before insert exchange. Seat the insert firmly into the Self-Grip pocket by hand, confirming full contact against the pocket walls before beginning a cut. Inspect the pocket bore and seating surfaces for chips or damage before each insert change to avoid misalignment. Follow the toolholder manufacturer guidelines for minimum clamping depth and maximum cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.2362 inches (6.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0098 inches (0.25 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC354\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5, C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturers Catalog Number\u003c\/strong\u003e: GFF 6N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6002516\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51727185412402,"sku":"6002516","price":315.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f15e8c466f7ea8bd04a67e2b50a23ec2.jpg?v=1788674462","url":"https:\/\/voomisupply.com\/products\/iscar-6002516-grooving-insert-gff6-ic354-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}