{"product_id":"iscar-6002445-cutoff-insert-gtr-2-2-2mm-carbide-ic354","title":"Iscar 6002445 Cutoff Insert GTR-2 2.2mm Carbide IC354","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6002445 is a single-end carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Part of the ISCAR Self-Grip series, it features a GTR-2 insert style with a 2.2 mm cutting width and an 8-degree right-hand lead angle that directs cutting forces and chip flow away from the workpiece shoulder. The insert is manufactured from IC354 carbide grade with a PVD coating process, placing it in the C5\/C6 material grade range for use on steel, stainless, and high-temperature alloys. A 0.16 mm corner radius and 7-degree relief angle contribute to edge stability during deep cutoff passes. Machining professionals and toolroom technicians install this insert as a consumable replacement in compatible Self-Grip toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for cutoff and grooving applications in both production and job-shop turning environments. The right-hand orientation positions the cutting edge for standard right-to-left feed on a conventional lathe setup. The GTR-2 insert size code 2 and seat size 2 classification makes it a direct fit within the ISCAR Self-Grip clamping system, where the toolholder mechanically grips the insert without additional fasteners. Applications include bar stock parting, groove profiling, and shallow face grooving on ferrous and non-ferrous workpieces where consistent width control is critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2.2 mm cutting width for precise parting and grooving slot control\u003c\/li\u003e\n  \u003cli\u003eIC354 carbide grade with PVD coating for wear resistance on steel and stainless\u003c\/li\u003e\n  \u003cli\u003e8-degree right-hand lead angle for controlled chip flow and reduced burr\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle promotes edge clearance during deep cutoff cuts\u003c\/li\u003e\n  \u003cli\u003e0.16 mm corner radius for a clean, low-stress transition at groove base\u003c\/li\u003e\n  \u003cli\u003eSelf-Grip clamp-style holding method — no fastener required for insert retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Self-Grip series toolholders accepting a size 2 insert seat. Verify toolholder seat size and insert style designation (GTR) before ordering to confirm fitment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician familiar with ISCAR Self-Grip toolholder systems. Power down and lock out the machine spindle before seating or removing any insert. Insert seating relies on the Self-Grip clamping geometry — do not strike the insert with a hammer or hard tool to force seating. Inspect the insert pocket and clamping surfaces for debris or wear before installing a new insert to ensure proper grip and repeatable cutting geometry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GTR-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.2 mm (0.0866 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 8 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.16 mm (0.0063 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC354\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5, C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp (Self-Grip)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Cut-off\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6002445\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51727078129970,"sku":"6002445","price":243.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4178e17816be2dcd5d331932c85a3a16.jpg?v=1788672944","url":"https:\/\/voomisupply.com\/products\/iscar-6002445-cutoff-insert-gtr-2-2-2mm-carbide-ic354","provider":"Voomi Supply","version":"1.0","type":"link"}