{"product_id":"iscar-6002444-cutoff-insert-3mm-carbide-ic354","title":"Iscar 6002444 Cutoff Insert 3mm Carbide IC354","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6002444 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Manufactured in the GFR Self-Grip series, it features a 3.00 mm (0.1181 inch) cutting width, an 8-degree right-hand lead angle, and a 7-degree relief angle. The insert is coated via PVD with IC354 grade, a wear-resistant coating optimized for cutting stainless steel and general steel. A 0.20 mm corner radius reduces edge chipping and extends tool life on interrupted cuts. This insert is intended for installation by machinists and CNC toolroom technicians performing cut-off and deep grooving work.\u003c\/p\u003e\n\u003cp\u003eThe 6002444 is suited for parting operations in production turning environments handling stainless steel (ISO material code M) and steel (ISO material code P). The Self-Grip clamping method secures the insert mechanically in a compatible ISCAR GFR-series holder without additional fasteners, making it appropriate for high-cycle production runs and Swiss-style turning applications where quick insert changes are required. The single-ended geometry and right-hand orientation should be confirmed against the specific toolholder designation before ordering.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3.00 mm cutting width (0.1181 inch) for precise parting and grooving\u003c\/li\u003e\n  \u003cli\u003eIC354 PVD-coated solid carbide grade — optimized for stainless steel and steel\u003c\/li\u003e\n  \u003cli\u003e8-degree right-hand lead angle with 7-degree relief for chip clearance\u003c\/li\u003e\n  \u003cli\u003e0.20 mm corner radius reduces edge stress on difficult materials\u003c\/li\u003e\n  \u003cli\u003eSelf-Grip clamp-hold design — no screw required for insert retention\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 tooling data standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in ISCAR GFR-series Self-Grip cutoff and grooving toolholders. Confirm holder designation accepts the GFR3 insert style and right-hand orientation before installation. Compatible with workpiece material grades C5 and C6.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and insert changes should be performed by a qualified machinist with the machine powered off and spindle locked. Seat the insert fully into the Self-Grip holder pocket and verify secure clamping before running. Follow the toolholder manufacturer's torque and setup instructions where applicable. Inspect the insert seating pocket for chips or debris before each insert change to prevent insert rocking and premature failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC354\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: PVD Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 8 degrees, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5, C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Cut-off\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6002444\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51739195801906,"sku":"6002444","price":262.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7ce9a9a567d9d1445582d4f8441dae49.jpg?v=1788811182","url":"https:\/\/voomisupply.com\/products\/iscar-6002444-cutoff-insert-3mm-carbide-ic354","provider":"Voomi Supply","version":"1.0","type":"link"}