{"product_id":"iscar-6000455-cutoff-insert-3mm-carbide-right-hand","title":"Iscar 6000455 Cutoff Insert 3mm Carbide Right Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6000455 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. This single-end insert features a 3 mm cutting width (0.1181 inches), a 15-degree right-hand lead angle, and a 7-degree relief angle. The insert seats in a Self-Grip style clamping system, which uses mechanical clamp retention for secure, repeatable positioning under interrupted cuts and high feed rates. The IC20 grade is an uncoated carbide formulation suited for a broad range of workpiece materials. Machinists and CNC operators install this insert in compatible ISCAR Self-Grip toolholders for production turning applications.\u003c\/p\u003e\u003cp\u003eThis insert is applied in cut-off and parting operations on turning machines in both job shop and production environments. The right-hand lead angle geometry promotes chip flow away from the finished bore or part face during separation cuts. Compatible workpiece materials include cast iron, non-ferrous metals, stainless steel, and exotic alloys, consistent with material codes H, K, M, N, and S per ISO classification. The 0.20 mm corner radius (0.0079 inches) helps control burr formation at the part separation point. This insert is not rated for multi-use regrinding; it is a single-use, indexable tool.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 mm cutting width (0.1181 inches) for standard parting and grooving applications\u003c\/li\u003e\n\u003cli\u003eSolid carbide IC20 grade, uncoated, suitable for universal workpiece material groups\u003c\/li\u003e\n\u003cli\u003e15-degree right-hand lead angle promotes controlled chip evacuation during cut-off\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle reduces flank wear and friction on the trailing edge\u003c\/li\u003e\n\u003cli\u003e0.20 mm corner radius for reduced burr at part separation\u003c\/li\u003e\n\u003cli\u003eSelf-Grip clamping style provides rigid, repeatable seating in compatible toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with ISCAR Self-Grip series toolholders that accept GFR-style cutoff inserts. Compatible with workpiece material groups H, K, M, N, and S per ISO classification. Conforms to ISO 13399 tooling data standards. Material grades C2 and C3 apply.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before changing inserts. Use the appropriate torque wrench and ISCAR-specified clamping hardware to seat the insert; do not overtighten the clamp screw. Verify insert orientation and lead angle direction match the programmed toolpath before resuming cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 15 degrees, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: H; K; M; N; S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2; C3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Cut-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturers Catalog Number\u003c\/strong\u003e: GFR 3-15D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000455\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51733277573426,"sku":"6000455","price":194.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/00f43f57186e3cbcf191a21f3b285b64.jpg?v=1788753501","url":"https:\/\/voomisupply.com\/products\/iscar-6000455-cutoff-insert-3mm-carbide-right-hand","provider":"Voomi Supply","version":"1.0","type":"link"}