{"product_id":"iscar-6000292-gfn-3-ic54-carbide-cutoff-insert-3-03mm","title":"Iscar 6000292 Gfn 3 IC54 Carbide Cutoff Insert 3.03mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 6000292 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It belongs to the Self-Grip series and carries the IC54 manufacturer grade, indicating an uncoated carbide substrate suited for a range of ferrous and non-ferrous workpiece materials. The insert features a 3.03 mm (0.1193 inch) cutting width, a neutral lead angle, a 7-degree relief angle, and a 0.20 mm corner radius. These geometry characteristics promote clean, consistent cuts during cutoff and grooving work. Machinists and toolroom technicians install this insert into compatible ISCAR Self-Grip toolholders as part of routine insert replacement.\u003c\/p\u003e\u003cp\u003eThis insert is intended for cutoff applications in production turning environments, including job shops and high-volume manufacturing cells. The GFN 3 insert style and size code 3 designation place it within a standardized family of parting inserts commonly used on medium-bore workpieces. Its uncoated solid carbide construction makes it appropriate for dry cutting or cutting with coolant where coating adhesion or thermal cycling could otherwise affect edge integrity. A licensed machinist or CNC operator performs the insert swap, typically during scheduled tooling maintenance or edge-wear replacement cycles.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3.03 mm (0.1193 inch) cutting width for precise parting and grooving\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction with IC54 grade for consistent edge performance\u003c\/li\u003e\n\u003cli\u003eNeutral lead angle and neutral hand for straightforward insert orientation\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle reduces rubbing and supports clean chip evacuation\u003c\/li\u003e\n\u003cli\u003e0.20 mm corner radius minimizes stress concentration at the cutting edge\u003c\/li\u003e\n\u003cli\u003eSingle-end insert design; replace when edge wear is reached\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement insert for ISCAR Self-Grip series toolholders accepting GFN 3 style inserts. Verify toolholder seat geometry and insert size code before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert replacement should be performed by a qualified machinist or CNC operator with the machine powered down and the spindle locked. Use the correct torque wrench or clamping key specified for the Self-Grip toolholder to secure the insert without over-clamping. Inspect the insert pocket and clamping surfaces for chips or wear before seating the new insert. Follow the toolholder manufacturer guidelines and applicable shop safety procedures during all tooling changes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.03 mm (0.1193 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Cut-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000292\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51754859856178,"sku":"6000292","price":195.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/30bd5a3305103fbc91f2e4cc8255fd25.jpg?v=1788949305","url":"https:\/\/voomisupply.com\/products\/iscar-6000292-gfn-3-ic54-carbide-cutoff-insert-3-03mm","provider":"Voomi Supply","version":"1.0","type":"link"}