{"product_id":"iscar-6000286-cutoff-insert-gfn-3-ic20-3-03mm","title":"Iscar 6000286 Cutoff Insert Gfn 3 IC20 3.03mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 6000286 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It belongs to the GFN series, which uses a Self-Grip clamping method to secure the insert firmly in compatible toolholders. The insert carries the IC20 manufacturer grade and features a 3.03 mm (0.1193 inch) cutting width with a neutral lead angle and a 7-degree relief angle. A 0.20 mm corner radius helps control edge wear during cut-off cycles. This uncoated, single-end insert is intended for use by machinists and CNC turning professionals across a broad range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThe 6000286 is suited for cut-off and parting applications in production and job-shop environments. Its universal workpiece material designation covers cast iron, non-ferrous metals, stainless steel, heat-resistant alloys, and general steels, corresponding to ISO material codes H, K, M, N, and S. The Self-Grip series is commonly found in medium- to high-volume turning setups where repeatable insert seating and quick changeover are priorities. Material grades C2 and C3 indicate suitability for a wide range of machining conditions from finishing to general-purpose stock removal.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3.03 mm (0.1193 inch) cutting width for precise parting grooves\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction, IC20 grade, uncoated for versatile workpiece compatibility\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and 7-degree relief angle for balanced cutting forces\u003c\/li\u003e\n  \u003cli\u003e0.20 mm corner radius for controlled edge geometry\u003c\/li\u003e\n  \u003cli\u003eSelf-Grip clamping method for secure, repeatable insert retention\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 standards for insert identification and data exchange\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Self-Grip series toolholders that accept the GFN 3 insert style. Compatible with workpiece materials classified under ISO codes H, K, M, N, and S. Material grades C2 and C3 apply.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. The machine spindle must be stopped and the turret or toolpost fully de-energized before inserting or removing any cutting insert. Use the appropriate torque wrench or clamping key specified by the toolholder manufacturer to seat the insert securely in the Self-Grip pocket. Inspect the insert pocket and clamping surfaces for chips or debris before seating the new insert to ensure proper contact and prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: GFN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.03 mm (0.1193 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamping Method\u003c\/strong\u003e: Self-Grip Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (ISO codes H, K, M, N, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Self-Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000286\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51750890701106,"sku":"6000286","price":195.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1e3d31fe222ca6228a368edfcde9809c.jpg?v=1788920384","url":"https:\/\/voomisupply.com\/products\/iscar-6000286-cutoff-insert-gfn-3-ic20-3-03mm","provider":"Voomi Supply","version":"1.0","type":"link"}