{"product_id":"iscar-5650498-square-end-mill-0-3937-in-2-flute-carbide","title":"Iscar 5650498 Square End Mill 0.3937 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5650498 is a solid carbide square end mill designed for precision milling of non-ferrous metals. It features a 0.3937-inch (10 mm) cutting diameter with a 2.3622-inch (60 mm) length of cut, classifying it as an extra-long reach tool. The two-flute, right-hand spiral design runs at a 30-degree helix angle, promoting efficient chip evacuation in aluminum, copper, brass, and similar non-ferrous workpiece materials. Fine grain carbide construction provides the edge integrity needed for tight-tolerance profiling, slotting, and side milling operations. This end mill is centercutting, allowing plunge entry. It ships uncoated and is intended for use without an additional surface treatment.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits CNC machining centers and manual mills where extended reach into deep pockets or cavities is required on non-ferrous metal components. The extra-long length of cut makes it well-suited for mold work, aerospace component machining, and general job shop applications where standard-length tools cannot reach the full depth of a feature. The straight-cylindrical shank mates directly with standard ER collet chucks, end mill holders, and hydraulic chucks sized for 10 mm shank diameters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.3937-inch (10 mm) cutting diameter with fine grain solid carbide substrate for sharp, stable edges\u003c\/li\u003e\n  \u003cli\u003e2.3622-inch (60 mm) length of cut — extra-long classification for deep pocket and cavity work\u003c\/li\u003e\n  \u003cli\u003e2-flute geometry with 30-degree right-hand spiral helix for efficient chip evacuation in non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute orientation — compatible with standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suited for non-ferrous materials where coating adhesion or built-up edge is a concern\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank for use in collet chucks, end mill holders, and hydraulic chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual milling machines equipped with 10 mm straight-cylindrical shank toolholders. Primary workpiece material classification is non-ferrous metal (ISO material code N), including aluminum alloys, copper alloys, and similar materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or drawbar is disengaged before installing or removing the end mill. Verify proper shank engagement depth in the toolholder per the toolholder manufacturer's minimum grip specification — insufficient engagement on an extra-long tool increases deflection and breakage risk. Confirm runout at the cutting diameter before beginning a production cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.3937 inches (10 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.3622 inches (60 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 150 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal (ISO Code N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.032 to 0.059 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: 0.000 \/ -0.011 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5650498\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51739283226930,"sku":"5650498","price":188.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1f7c9f85bb1f994b630e708c2a47d465.jpg?v=1788812674","url":"https:\/\/voomisupply.com\/products\/iscar-5650498-square-end-mill-0-3937-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}