{"product_id":"iscar-5622025-end-replaceable-milling-tip-4-flute-carbide","title":"Iscar 5622025 End Replaceable Milling Tip 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5622025 is a carbide end replaceable milling tip from the Multimaster MM EC-4 series, designed for use in modular milling tool systems. It features a 0.75-inch cutting width, a maximum depth of cut of 0.62 inches, and a functional length of 1.0 inch. The IC908 submicron carbide grade is applied with a PVD-deposited TiAlN coating, delivering thermal and wear resistance across a wide range of workpiece materials. The 45-degree helix angle and four-flute geometry promote efficient chip evacuation and stable cutting action. This tip is installed and replaced by machinists and toolroom technicians as part of a quick-change milling system.\u003c\/p\u003e\n\u003cp\u003eThis milling tip is suited for end milling operations on steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. The 90-degree lead angle makes it appropriate for shoulder milling and slotting applications. It is intended for use in production and job-shop environments where modular tooling changeovers reduce downtime. The right-hand cut orientation is standard for conventional vertical and horizontal machining center setups. No coolant-through capability is present, so external coolant or air blast is the recommended cooling method.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIC908 submicron carbide grade with PVD TiAlN coating for extended tool life on tough materials\u003c\/li\u003e\n  \u003cli\u003e4-flute geometry with 45-degree helix angle for efficient chip flow and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003e0.75-inch cutting width and 0.62-inch maximum depth of cut for shoulder and slot milling\u003c\/li\u003e\n  \u003cli\u003e90-degree lead angle supports true 90-degree shoulder walls\u003c\/li\u003e\n  \u003cli\u003eModular Multimaster MM EC-4 series interface for fast tip replacement without removing the holder\u003c\/li\u003e\n  \u003cli\u003eCompatible with steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR Multimaster MM EC-4 series modular milling holders that accept the .750B62R000 insert size interface. Compatible workpiece material categories include P (steel), M (stainless steel), K (cast iron), N (non-ferrous metal), S (superalloys and titanium), and H (hard material) per ISO classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eTip replacement is performed by a machinist or toolroom technician following the machine tool manufacturer lockout and tagout procedure before any tooling change. Secure the Multimaster holder in a holder fixture or vise when threading the milling tip to avoid damage to the coupling threads. Verify torque is applied with the appropriate ISCAR Multimaster torque key — do not use standard hex wrenches. Inspect the coupling face and threads for chips or debris before seating the new tip.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.62 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 1.0 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.0 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: None\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Multimaster MM EC-4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291601\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5622025\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51730734514482,"sku":"5622025","price":487.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a49e0ffb0edeea26949f0b8fc2edcb4.jpg?v=1788721938","url":"https:\/\/voomisupply.com\/products\/iscar-5622025-end-replaceable-milling-tip-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}