{"product_id":"iscar-5621365-toroidal-milling-tip-12mm-6-flute-ic908","title":"Iscar 5621365 Toroidal Milling Tip 12mm 6 Flute IC908","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 5621365 is a toroidal end-replaceable milling tip in the Multimaster MM ETR series, designed for use with compatible Multimaster modular tooling holders. Built from sub-micrograin carbide and finished with a PVD-applied TiAlN coating, this tip delivers thermal stability and wear resistance across a wide range of workpiece materials. The cutting diameter is 12 mm (0.4728 inches), the maximum depth of cut is 9 mm (0.3546 inches), and the functional length is 16.50 mm (0.6501 inches). With 6 flutes and a 30-degree helix angle, it is suited for productive milling in steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. The manufacturer grade is IC908.\u003c\/p\u003e\u003cp\u003eThis tip is intended for use in machining environments where a right-hand, toroidal-profile milling insert is required at the MM ETR 120 size. Typical applications include finishing and semi-finishing operations in steel and stainless steel, as well as superalloy and hard-material milling where TiAlN coating provides heat resistance. The 90-degree lead angle and zero chamfer angle geometry suits side and face milling scenarios. It is sold individually (package quantity of 1) with a minimum order quantity of 2 units.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eToroidal tip geometry with 6 flutes and 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eSub-micrograin carbide substrate with IC908 grade for toughness and edge stability\u003c\/li\u003e\n\u003cli\u003ePVD TiAlN coating for heat resistance in dry and near-dry machining\u003c\/li\u003e\n\u003cli\u003e12 mm cutting diameter, 9 mm maximum depth of cut, 16.50 mm functional length\u003c\/li\u003e\n\u003cli\u003eRight-hand cut orientation; 90-degree lead angle with no chipbreaker\u003c\/li\u003e\n\u003cli\u003eCompatible with P, M, K, N, S, and H workpiece material groups per ISO classification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with ISCAR Multimaster MM ETR series modular milling holders accepting the MM ETR 120A07R4.0 size tip. Conforms to ANSI standards. Coolant-through is not supported on this tip.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of Multimaster replaceable tips should be performed by a qualified machinist or tooling technician following the holder manufacturer torque and engagement procedures. Always ensure the machine spindle is fully stopped and the machine is in a safe, locked-out state before changing tips. Inspect the mating holder interface for wear, debris, or damage before seating the tip. Do not use damaged or out-of-tolerance holders, as improper seating can result in tip ejection during operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Multimaster MM ETR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilling Tip Type\u003c\/strong\u003e: Toroidal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 12.00 mm (0.4728 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 9 mm (0.3546 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 16.50 mm (0.6501 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.1576 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: 120A07R4.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Sub-micrograin Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5621365\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51738476183858,"sku":"5621365","price":341.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/de3c1021bf9a1c80f90fe74d8cbe723c.jpg?v=1788800032","url":"https:\/\/voomisupply.com\/products\/iscar-5621365-toroidal-milling-tip-12mm-6-flute-ic908","provider":"Voomi Supply","version":"1.0","type":"link"}