{"product_id":"iscar-5607252-spotting-drill-milling-tip-10mm-ic908-carbide","title":"Iscar 5607252 Spotting Drill Milling Tip 10mm IC908 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5607252 is a Multimaster series replaceable milling tip designed for spotting and chamfering operations on CNC machining centers and milling platforms. This tip features a 10.00 mm (0.3940 inch) cutting diameter with a 90-degree included angle, producing precise 45-degree lead-angle chamfers and center spots in a single pass. Manufactured from sub-micrograin carbide in grade IC908 with a PVD-applied TiAlN coating, the tip delivers thermal resistance and edge stability across a wide range of workpiece materials. The right-hand cutting geometry and two-flute configuration balance chip evacuation with surface finish quality. Licensed machinists, CNC operators, and toolroom technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThe ISCAR 5607252 is suited for use on steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials, covering ISO material groups P, M, K, N, S, and H. It is engineered for applications where a consistent spot depth and chamfer angle are required before drilling or threading operations. The 19.00 mm extension from holder and 0.7486-inch functional length make it a compact choice for tight-tolerance fixturing environments. It ships individually but carries a minimum order quantity of 2 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSub-micrograin carbide construction in IC908 grade for edge toughness and wear resistance\u003c\/li\u003e\n  \u003cli\u003ePVD TiAlN coating provides thermal protection during high-speed and dry cutting\u003c\/li\u003e\n  \u003cli\u003e90-degree included angle with 45-degree lead angle for accurate spotting and chamfering\u003c\/li\u003e\n  \u003cli\u003eTwo-flute right-hand geometry supports chip flow in a range of materials from aluminum to superalloys\u003c\/li\u003e\n  \u003cli\u003eReplaceable Multimaster tip design allows quick tip exchange without removing the holder from the spindle\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards for dimensional consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replaceable milling tip for ISCAR Multimaster modular tooling holders accepting the MM ECD 10X90 insert size. Confirm holder compatibility with the MM ECD series before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or toolroom technicians. Power down the machine spindle and confirm zero energy state before tip exchange. Use the appropriate ISCAR Multimaster torque key or wrench as specified by the holder manufacturer — do not use impact tools or improvised drivers on the mating thread interface. Inspect the holder coupling threads and seating face for debris or wear prior to installing a new tip.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 10.00 mm (0.3940 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.7486 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtension From Holder\u003c\/strong\u003e: 19.00 mm (0.7480 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: 10X90\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide (Sub-Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.086 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.36 inches (L) x 2.17 inches (W) x 0.98 inches (H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5607252\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51746632794418,"sku":"5607252","price":244.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c5ab388200d31416790d3c656084353c.jpg?v=1788871967","url":"https:\/\/voomisupply.com\/products\/iscar-5607252-spotting-drill-milling-tip-10mm-ic908-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}