{"product_id":"iscar-5606036-milling-insert-h600-wxcu-080612t-ic810","title":"Iscar 5606036 Milling Insert H600 Wxcu 080612T IC810","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5606036 is a solid carbide milling insert carrying ANSI designation H600 WXCU 080612T IC810. It belongs to the HELI6FEED series and is designed for high-feed face milling applications in steel and cast iron. The insert features a trigon (80-degree included angle) WXCU style with a negative rake geometry and a T-Land cutting edge style that improves edge stability under aggressive feed rates. The IC810 grade uses a PVD-applied AlTiCrN plus TiN Sumotec coating for thermal resistance and wear life. With six usable cutting edges on a double-sided body, the insert delivers a low cost-per-edge ratio for production milling environments. Licensed HVAC and mechanical trades working with fabricated steel components will recognize the insert as a shop-floor consumable installed and replaced by machinists and tooling technicians.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for milling steel and cast iron workpieces in both roughing and semi-finishing passes where high feed rates and shallow axial depths are employed. The right-hand configuration and screw-clamping holding method make it compatible with standard FWX cutter bodies in the HELI6FEED series. The 0 degree relief angle and negative rake geometry provide the edge strength needed when cutting harder ferrous materials at elevated chip loads. Applications span general machining shops, production facilities, and job shops processing P-code steel and K-code cast iron components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTrigon WXCU insert style with 80-degree included angle for strong, stable cutting geometry\u003c\/li\u003e\n  \u003cli\u003eSix cutting edges on a double-sided body for maximum cost efficiency per insert\u003c\/li\u003e\n  \u003cli\u003eIC810 grade with PVD AlTiCrN plus TiN Sumotec coating for extended wear resistance in steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut and cutting edge effective length of 0.3465 inches\u003c\/li\u003e\n  \u003cli\u003eCorner radius of 0.0472 inches (3\/64 inch) for controlled edge engagement\u003c\/li\u003e\n  \u003cli\u003eRight-hand, screw-held mounting compatible with FWX cutter body series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with FWX cutter bodies in the ISCAR HELI6FEED series. Primary workpiece materials are steel (ISO material code P) and cast iron (ISO material code K). Conforms to ANSI and ISO 13399 standards with ANSI code H600 WXCU 080612T IC810 and ISO code H600 WXCU 080612T.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert replacement is performed by machinists or tooling technicians following the cutter body manufacturer torque and clamping specifications for screw-held inserts. Power down and lock out the machine spindle before seating or removing inserts. Inspect the insert pocket and clamping screw for wear or damage before installing a new insert. Handle solid carbide inserts with care to avoid chipping the cutting edges during installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HELI6FEED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: WXCU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Trigon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 080612\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC810\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiCrN plus TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: Sumotec PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double Sided\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: T-Land\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0472 inches (3\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5374 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.2680 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.3465 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Effective Length\u003c\/strong\u003e: 0.3465 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Series Compatibility\u003c\/strong\u003e: FWX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5606036\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51737333596466,"sku":"5606036","price":479.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/34531da37e0c11b412589e3fe9876cf3.jpg?v=1788787218","url":"https:\/\/voomisupply.com\/products\/iscar-5606036-milling-insert-h600-wxcu-080612t-ic810","provider":"Voomi Supply","version":"1.0","type":"link"}