{"product_id":"iscar-5567151-carbide-replaceable-tip-drill-0-4920-in-ic907","title":"Iscar 5567151 Carbide Replaceable Tip Drill 0.4920 in IC907","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5567151 is a carbide replaceable tip drill insert designed for precision hole-making in demanding materials. Built to the ICM series platform, this tip carries the IC907 grade designation, a submicron solid carbide substrate applied with a PVD-coated TiAlN and TiN finish. The cutting diameter is 0.4920 inches with a 140-degree included angle at the drill point. The point geometry is thinned, using a T-Land style edge prep and slow spiral fluting to manage chip flow and reduce cutting forces in difficult workpiece materials. Licensed HVAC and plumbing trades do not install this part — it is a machining consumable used by machinists and toolroom technicians in metal-cutting operations.\u003c\/p\u003e\n\u003cp\u003eThis replaceable tip is engineered for drilling operations in stainless steel, superalloys, and titanium as its primary workpiece materials, with secondary suitability in steel, cast iron, and hard materials. The ICM series uses an insert seat size 12 platform, and this tip indexes into compatible ICM series drill bodies without full tool replacement. At 0.2760 inches in height and 0.2010 inches of functional length, it is sized for the ICM 125 ISO number insert seat. The slow spiral flute type aids chip evacuation in gummy or work-hardening alloys such as austenitic stainless and titanium alloys.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide submicron substrate with IC907 grade designation for toughness in interrupted and difficult cuts\u003c\/li\u003e\n  \u003cli\u003ePVD-applied TiAlN and TiN dual coating for heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e140-degree included drill point angle with thinned point geometry to reduce thrust force\u003c\/li\u003e\n  \u003cli\u003eT-Land edge style for edge strength in stainless steel and superalloy drilling\u003c\/li\u003e\n  \u003cli\u003eSlow spiral flute type promotes controlled chip formation in work-hardening materials\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned geometry reduces centerline cutting load at drill entry\u003c\/li\u003e\n  \u003cli\u003eCompliant with ISO 13399 tooling data standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR ICM series replaceable tip drill bodies sized for insert seat size 12, ISO number ICM 125. Compatible with drilling operations in stainless steel (ISO material code M), superalloys and titanium (ISO material code S), steel (ISO material code P), cast iron (ISO material code K), and hard materials (ISO material code H). Coolant-through is not supported by this tip geometry.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician using the appropriate torque wrench and insert key specified for the ICM series drill body. Ensure the drill body seat is clean and free of chips or debris before seating the tip. Do not exceed the clamping method specified for the twist-lock insert holding system. Follow the machine tool manufacturer and ISCAR tooling assembly instructions for proper tip engagement and runout verification before cutting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.4920 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 7.01 mm (0.2760 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.2010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC907\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ICM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: ICM 125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN and TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: T-Land\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Slow Spiral)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Superalloy, Titanium (ISO M, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Steel, Cast Iron, Hard Material (ISO P, K, H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5567151\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51733407924530,"sku":"5567151","price":269.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f83a5e29e5d675790d5cf88f99d59d79.jpg?v=1788755304","url":"https:\/\/voomisupply.com\/products\/iscar-5567151-carbide-replaceable-tip-drill-0-4920-in-ic907","provider":"Voomi Supply","version":"1.0","type":"link"}