{"product_id":"iscar-5508403-carbide-replaceable-tip-drill-0-547-in-icp","title":"Iscar 5508403 Carbide Replaceable Tip Drill 0.547 in Icp","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5508403 is a solid carbide replaceable tip drill insert from the ICP series, designed for high-performance drilling in metalworking applications. This tip carries a TiAlN PVD coating and a honed cutting edge finish applied to IC908 submicron carbide grade, delivering wear resistance and edge stability in demanding cutting conditions. The 140-degree included angle with a thinned web point reduces thrust forces and improves chip evacuation at entry. With a cutting diameter of 0.547 inches and a functional length of 0.216 inches, this insert is a direct-swap replacement tip for compatible ICP-series modular drill bodies. Installation is performed by machinists and tooling technicians on CNC machining centers and drill presses.\u003c\/p\u003e\n\u003cp\u003eThis replaceable tip is rated primarily for steel workpieces (ISO material code P) and is also suited for stainless steel, cast iron, super-alloys, titanium, and hard materials (ISO codes M, K, S, and H). It fits into ICP insert seat size 13 drill bodies. The slow-spiral flute design and twist insert-holding method make it appropriate for short-hole drilling operations where tool rigidity and accurate entry are priorities. Coolant-through capability is not supported by this tip.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide IC908 submicron grade for extended tool life in steel and difficult materials\u003c\/li\u003e\n  \u003cli\u003eTiAlN PVD coating provides thermal and oxidation resistance during high-speed drilling\u003c\/li\u003e\n  \u003cli\u003e140-degree included angle with thinned web point reduces entry thrust and improves centering\u003c\/li\u003e\n  \u003cli\u003eHoned cutting edge geometry minimizes built-up edge on stainless steel and super-alloys\u003c\/li\u003e\n  \u003cli\u003eSlow-spiral flute design supports chip control in short-hole drilling applications\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 tooling data standards for integration with CAM and tooling management systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ICP-series modular drill bodies accepting insert seat size 13 and ISO number ICP 139. Consult the ISCAR ICP drill body selection guide to confirm shank diameter and body compatibility before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed by a qualified machinist or tooling technician. Power down and lock out the machine spindle before removing or seating the tip. Use the correct torx or retention key specified by the drill body manufacturer to achieve proper seating torque  -  do not improvise with substitute tooling. Inspect the insert pocket and seating face for chips or damage before installing a new tip to ensure concentricity and prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.547 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.216 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.299 inches (7.59 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Thinned Web\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: ICP 139\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Twist\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Cast Iron, Super-alloys, Titanium, Hard Material (ISO M, K, S, H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5508403\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51742822367538,"sku":"5508403","price":258.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4dfe7a2828e41566591a3db3ae528683.jpg?v=1788839613","url":"https:\/\/voomisupply.com\/products\/iscar-5508403-carbide-replaceable-tip-drill-0-547-in-icp","provider":"Voomi Supply","version":"1.0","type":"link"}