{"product_id":"iscar-5508325-carbide-tip-drill-insert-tialn-0-346-in","title":"Iscar 5508325 Carbide Tip Drill Insert Tialn 0.346 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 5508325 is a solid carbide replaceable tip drill insert in the ICM series, designed for use in compatible modular drill body systems. It carries a TiAlN coating applied via PVD process and features a 140-degree drill point angle with a thinned web point style. The cutting diameter is 0.346 inches (8.79 mm), the functional length is 0.159 inches, and the overall height is 0.213 inches (5.41 mm). The IC908 submicron carbide grade and T-Land geometry make this insert well suited for demanding hole-making operations in difficult workpiece materials. Licensed machinists and CNC operators typically source and install these tips.\u003c\/p\u003e\u003cp\u003eThis insert is intended for drilling operations on stainless steel, superalloys, and titanium as primary workpiece materials, with secondary suitability for steel, cast iron, and hard materials. The slow spiral, two-flute configuration and web-thinned point support chip evacuation and entry stability in these applications. It conforms to ISO 13399 standards for cutting tool data representation. Coolant-through capability is not supported by this insert. Typical use is in production machining environments where tip replacement extends the life of the drill body without replacing the full tool assembly.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide IC908 submicron grade for hardness and wear resistance in difficult materials\u003c\/li\u003e\n\u003cli\u003eTiAlN coating via PVD process for thermal and oxidation resistance\u003c\/li\u003e\n\u003cli\u003e140-degree thinned web point reduces thrust force at drill entry\u003c\/li\u003e\n\u003cli\u003eSlow spiral, two-flute design supports chip flow in stainless steel, superalloys, and titanium\u003c\/li\u003e\n\u003cli\u003eT-Land insert geometry improves edge stability during interrupted or demanding cuts\u003c\/li\u003e\n\u003cli\u003eConforms to ISO 13399 cutting tool data standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replaceable tip insert for compatible ISCAR ICM series modular drill bodies using insert seat size 8. ISO number ICM 088 identifies the matching body interface.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eReplaceable tip drill inserts of this type are installed and removed by machining technicians using the twist-lock method specified for the ICM series body. The machine spindle must be fully stopped and the tool cleared of the workpiece before tip replacement. Follow the drill body manufacturer torque and seating instructions for the specific body model. Inspect the insert seat for wear or debris before seating a new tip to ensure proper alignment and runout.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.346 inches (8.79 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.159 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.213 inches (5.41 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Thinned Web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: M (T-Land)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Twist\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Superalloy, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Steel, Cast Iron, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ICM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: ICM 088\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5508325\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51738001277234,"sku":"5508325","price":248.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/61e0b6c6db56069ac242e5025510520d.jpg?v=1788795563","url":"https:\/\/voomisupply.com\/products\/iscar-5508325-carbide-tip-drill-insert-tialn-0-346-in","provider":"Voomi Supply","version":"1.0","type":"link"}