{"product_id":"iscar-5505236-carbide-replaceable-tip-drill-0-736-in-ic908","title":"Iscar 5505236 Carbide Replaceable Tip Drill 0.736 in IC908","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ISCAR 5505236 is a carbide replaceable tip drill from the IDI-SG series, designed for high-performance hole-making in demanding metalworking applications. The drill tip carries the IC908 manufacturer grade, a submicron solid carbide material with a PVD-applied TiAlN coating that resists heat and wear at elevated cutting speeds. The cutting diameter is 0.736 inches, the included angle is 140 degrees, and the flute type is slow spiral with a thinned web point for reduced entry thrust. Two flutes channel chips away from the cutting zone. This is a replacement tip component — it is not a complete drill body — and is installed by qualified machinists or toolroom personnel on compatible IDI-SG shank bodies.\u003c\/p\u003e\u003cp\u003eThe 5505236 tip is suited for drilling steel, stainless steel, cast iron, superalloys, titanium, and hard materials, covering ISO material codes P, M, K, S, and H. The slow spiral geometry and web-thinned point make it effective across a wide range of workpiece hardness levels. It is a general-purpose drilling insert intended for production environments where consistent hole quality and tip replaceability reduce downtime compared to solid drill replacement. The SG insert geometry and size 18 insert seat designate the specific body interface required for correct seating and retention.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIC908 submicron solid carbide grade with PVD TiAlN coating for extended wear resistance in ferrous and hard materials\u003c\/li\u003e\n\u003cli\u003e140-degree included angle with thinned web point for reduced thrust and cleaner entry\u003c\/li\u003e\n\u003cli\u003eSlow spiral flute design promotes chip evacuation across steel, stainless, cast iron, superalloys, and titanium\u003c\/li\u003e\n\u003cli\u003eReplaceable tip format minimizes tooling cost by allowing tip swap without replacing the full shank body\u003c\/li\u003e\n\u003cli\u003eConforms to ISO 13399 tooling data standards for compatibility with digital tool management systems\u003c\/li\u003e\n\u003cli\u003eSize 18 insert seat and SG geometry for precise, repeatable seating on matching IDI-SG bodies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with IDI-SG series replaceable tip drill bodies requiring a size 18 insert seat and SG insert geometry. The ISO number for this tip is IDI 187-SG. Confirm shank body seat size and geometry before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tip changes should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully stopped and locked out before removing or seating a replaceable tip. Use the manufacturer-specified torque wrench or key for the twist-lock retention method — do not use impact tools or improvised drivers. Inspect the insert seat for chips, contamination, or wear before seating the new tip, as seat damage will affect runout and hole quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.736 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Thinned Web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: SG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.193 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length \/ Projection\u003c\/strong\u003e: 0.327 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Material Codes\u003c\/strong\u003e: P, M, K, S, H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: IDI-SG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: IDI 187-SG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5505236\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51737547505970,"sku":"5505236","price":267.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/56b38ab3353690a8188f5aed1cc3e651.jpg?v=1788790193","url":"https:\/\/voomisupply.com\/products\/iscar-5505236-carbide-replaceable-tip-drill-0-736-in-ic908","provider":"Voomi Supply","version":"1.0","type":"link"}