{"product_id":"iscar-5505181-carbide-replaceable-tip-drill-1-in-idi-sg","title":"Iscar 5505181 Carbide Replaceable Tip Drill 1 in Idi-sg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 5505181 is a solid carbide replaceable tip drill in the IDI-SG series, designed for high-productivity hole-making in demanding machining environments. The drill tip carries an IC908 submicron carbide grade with a PVD-applied TiAlN coating, delivering heat resistance and edge retention across a wide range of workpiece materials. The included angle measures 140 degrees and the cutting diameter is 1 inch, with a functional length of 0.251 inches. The tip uses a web-thinned, slow-spiral flute geometry for controlled chip evacuation and reduced thrust force. This part is installed by machinists and tool-room technicians as a direct replacement tip in compatible IDI-SG series drill bodies.\u003c\/p\u003e\n\u003cp\u003eThe 5505181 tip is suited for general-purpose drilling operations on steel, stainless steel, cast iron, superalloys, titanium, and hard materials, covering ISO material groups P, M, K, S, and H. It fits applications where a replaceable-tip system is preferred over solid-drill tooling, reducing tooling cost per hole while maintaining consistent geometry. Typical use is in CNC machining centers and drill presses where the IDI-SG body is already in service and the tip requires replacement after wear.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIC908 submicron solid carbide grade with PVD TiAlN coating for extended tool life in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e140-degree included angle with web-thinned point reduces cutting forces and improves self-centering\u003c\/li\u003e\n  \u003cli\u003eSlow-spiral, two-flute geometry promotes chip control in deep or interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eSG insert geometry twist-lock holding method for repeatable tip positioning in IDI-SG bodies\u003c\/li\u003e\n  \u003cli\u003eCovers five ISO material groups: P, M, K, S, and H\u003c\/li\u003e\n  \u003cli\u003eComplies with ISO 13399 tooling data standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replaceable tip for ISCAR IDI-SG series drill bodies with an insert seat size of 25, ISO number IDI 254-SG. Compatible workpiece materials include steel, stainless steel, cast iron, superalloys, titanium, and hard materials per ISO groups P, M, K, S, and H.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Before tip replacement, ensure the spindle is fully stopped, locked out, and the drill body is secured in a vise or fixture. Use the appropriate ISCAR torque key or wrench specified for IDI-SG seat size 25 bodies to seat the tip; do not use improvised tools that may damage the seating surface. Inspect the pocket and coolant ports for chips or debris before installing the new tip.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.251 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 0.417 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Web Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: SG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: IDI 254-SG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Material Groups\u003c\/strong\u003e: P, M, K, S, H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: IDI-SG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5505181\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51732563689778,"sku":"5505181","price":168.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b24b7c7328a20a8a868745840165e04e.jpg?v=1788744487","url":"https:\/\/voomisupply.com\/products\/iscar-5505181-carbide-replaceable-tip-drill-1-in-idi-sg","provider":"Voomi Supply","version":"1.0","type":"link"}