{"product_id":"iscar-3399247-corner-radius-end-mill-1-2-in-3-flute","title":"Iscar 3399247 Corner Radius End Mill 1\/2 in 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 3399247 is a solid carbide corner radius end mill designed for high-performance material removal in non-ferrous metal applications. Built on the ECAI-B3-EC series, it features a 0.5 inch cutting diameter, a 0.015 inch corner radius, and a DLC (Diamond-Like Carbon) PVD coating that reduces friction and extends tool life in aluminum and other non-ferrous materials. The three-flute, right-hand spiral geometry supports both roughing and finishing operations in a single tool. With an overall length of 3 inches and an extended reach design, this end mill suits setups where tool projection is a factor. It is installed by machinists and CNC operators working in precision metalworking environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is engineered primarily for non-ferrous metals, including aluminum alloys and similar materials. The short flute length of 0.875 inches keeps deflection low during aggressive cuts, while the 1.375 inch reach length accommodates deeper setups without requiring a specialty holder. The straight cylindrical shank (0.5 inch diameter) fits standard end mill toolholders. Centercutting geometry allows plunge entry directly into the workpiece. The coarse pitch and submicron carbide substrate make it well suited for high-feed, high-speed CNC milling programs targeting surface finish and dimensional accuracy in the same operation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDLC PVD coating reduces built-up edge and extends tool life in non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e0.015 inch corner radius protects cutting edges and improves surface finish at part corners\u003c\/li\u003e\n  \u003cli\u003eThree-flute, right-hand spiral geometry supports combined roughing and finishing passes\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge milling without a pre-drilled entry point\u003c\/li\u003e\n  \u003cli\u003eExtended reach of 1.375 inches accommodates deeper workpiece features\u003c\/li\u003e\n  \u003cli\u003eSubmicron carbide substrate provides hardness and toughness for demanding non-ferrous applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard cylindrical-bore end mill toolholders accepting a 0.5 inch straight shank. Intended for non-ferrous metal workpiece materials as designated by material code N. Part of the ISCAR ECAI-B3-EC series; manufacturer catalog reference ECAI-B3 .5-.9\/1.4CR015-3.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or spindle lock is engaged before inserting or removing the end mill from the toolholder. Confirm runout with a dial indicator after clamping, as excessive runout accelerates edge wear on carbide tools. Do not exceed the toolholder manufacturer's recommended clamping torque for the shank diameter.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.015 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Submicron Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: DLC (Diamond-Like Carbon), PVD Applied\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ECAI-B3-EC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3399247\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51744628867378,"sku":"3399247","price":179.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5f4db0e48a1997cfe5dd176c66a02da0_5c6bb86c-e2d2-4e17-a24e-785440cf490b.jpg?v=1788859194","url":"https:\/\/voomisupply.com\/products\/iscar-3399247-corner-radius-end-mill-1-2-in-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}